T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: I'm using mudlet on Ubuntu - does anyone know if there is a better client to use?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sivak Tech: can use wine and aardwolf mushclient
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sivak Tech: mudllet has like no plugins
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: I tried downloading Wine, but I hit a snag and couldn't figure out what I was doing wrong.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sivak Tech: I never got wine to work
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: so mudlet not very good in general?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: Hey, at least it isn't just me.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sivak Tech: mudlet has a fantastic command buffer
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: i like mudlet
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Fierre Tech: Mudlet does have an Aardwolf plugin that's pretty good
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Nohh Tech: its not mudlet's fault, just the unofficial aardwolf client happens to be mushclient and most plugins for aard are written for mushclient
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: but i do use muschlient because of the aard specific plugins
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: Fierre I tried installing that and it really just messed up my display without adding anything - is there a trick?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Fierre Tech: Huh, not sure. When I tried it a few months ago it worked okay
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Fierre Tech: One moment
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Fierre Tech: This one? https://github.com/xekon/AardwolfMudlet
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: I think it was a different one. I'll give this one a shot
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Fierre Tech: Ah yes, I think there's another one that hasn't been updated in a long time, too. Hopefully that one works :)
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: Thanks, I'm going to give this a shot.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Smudge Tech: S&D (Crowley): I did a clean install of the Aard MushClient and copied over my Aardwolf.db and SnDdb.db files. All good, except that Room CPs are broken - 99% of the targets are unresolved (in red). Any thoughts?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Nohh Tech: xset index areas ?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Smudge Tech: Ah, thanks! I should have seen that :)
T3/r7/2021-02-01.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: I dont understand why my phone shows multiple installations of the same app when Im trying to clean up storage? something doesnt compute to my brain I guess. or im using the wrong apps, which is lol
T3/r7/2021-02-01.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Have you done xset index areas? It says to do so upon installing. But really, you should do 'snd create' first, and then 'xset index areas'. Unless you're copying from Pwar's database, then you want snd merge.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Smudge Tech: Thanks Crowley. I did xset index areas on top of the copied db, it seems to be working now. Is there a downside to having not done 'snd create'?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Not really. snd create really is the command I should have had people do first if they weren't copying over a database, though.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: When you merge the database, it already does the create anyway.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Smudge Tech: this was not a pwars db, it was from another installation of your version
T3/r7/2021-02-01.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Oh, well, xset index areas should also create the database, too, anyway. As long as you don't get errors killing cp targets, then you are good to go.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: I installed this (https://github.com/xekon/AardwolfMudlet) yesterday. Today noexp keeps toggling on. Are they related? Is there a way to stop it?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: vconfig
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Spronktar Tech: noexp should not be toggling on automatically, it's probably that
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Nohh Tech: i'd imagine it's a setting to keep you from leveling before doing a campaign for that level
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Spronktar Tech: yeah, I have a trigger set up through MUSHclient to do the same thing, very useful
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: yes, you can set the exp cap before it toggles off
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: I see, how do I go in and change it?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Spronktar Tech: I'm not familiar with that app, sorry - but it's got to be in the menu options somewhere
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Nohh Tech: radric said vconfig ?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: pretty sure vconfig has an option, but I havent used it in a while
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: Awesome, I google the vconfig. Thank you.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: nah just type vconfig on the command line
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: it shows you all its options.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: to turn it off: vconfig cpexp -1 
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: to turn it on: vconfig cpexp 500   ... or something similar and when you hit 500 exp tnl it will toggle NOEXP on
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: Thanks!
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: sure thing!
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: I like mudlet, I just wish it had the level of aard support that mushclient has
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: Yeah, it is the only thing I've known so I don't think it is bad, but I've wondered what life on Windows or with Wine is like. haha This plugin seems good.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: yeah its not bad, but there are very advanced tools in mushclient.  DINV for example, mudlet doesn't have something like this.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: Ah, I see.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: I only just learned this myself.  DINV really helps manage your gear, build equipment sets, auto-determine the right gear to wear based on weighting of stats, optimize which stats to choose when they cap out for your level .. on and on.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: maybe Wine is worth the headache...
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: =h 17
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: I always hated Wine, almost as much as I hated Cygwin :P
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: now cygwin isn't necessary with WSL :-)
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: cygwin sounds familiar, but I don't have a clue what I would have used it for.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: it's "backwards wine"...gives you linux type stuff on Windows
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Borthain Tech: no reason for it anymore unless you must run a linux program on windows directly. WSL much better
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: Windows 10 has Windows Subsystem for Linux, which gives an actual Linux kernel, whereas cygwin just gave tools
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: would cygwin have been fairly commonly used to play muds 15 years ago?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: no
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Borthain Tech: wouldn't be anything to do with muds likely. some other tech reason
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: there has always been mudmaster at a minimum and that is far better than running something like tintin on windows using cygwin
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: there would've been no reason to use cygwin to play a MUD, as linux didn't give any advantages
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: I see.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}High Risk Losteix Tech: i may or may not have tried using cygwin 15 years ago to play muds. can't remember if tinyfugue had a decent windows port back then.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: I would bet money it didn't work :-P
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: haha
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Not an Imm Erikson Tech: Considering the rate of development, I'm sure it worked as well as it does today   :p
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: although I've been using my client since before there were any other real options ;-)
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: 31 years ago not even tintin existed, but we had tinyfugue }:>
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Perryn Tech: and you still use it?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: yep
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Not an Imm Erikson Tech: I think tintin predated tf....
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: you thing wrong
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: think*
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: I was using tintin in the mid 90s, I think it was a couple years old by then
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: tf started in feb 1990, tintin not until 1992
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: that sounds about right
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: hardest thing I ever did: port tintin to solaris...
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: although you could get technical and shave some time off tf, since it was initially tinytalk and not tinyfugue
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: heh, I ported some MUD and talker codebases to work on my AlphaStation running NetBSD back in the day...back then not much worked on native 64-bit
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: also, I used to hack into MCL to add mudmaster chat features to it.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: anyone remember MCL?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Not an Imm Erikson Tech: It's like JCL, but 3 better.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: Mud Client for Linux, it used a perl environment for aliases and text matching.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: I remember Mac common Lisp :-)
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sivak Tech: I used zmud or mudlet or just basic telnet ap
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: all input from the keyboard was piped through perl for possible expansion, and all output from the mud was checked in perl for matching regex's.  So basically you just wrote everything in perl.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: which if you are used to it, is a great language for scripting text matching and complex commands.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: well, it does form the basis for all reasonable text matching in the universe...the primary regex engine in pretty much every program that uses regex is PCRE, Perl Compatible Regular Expressions
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: well yeah, but it was more the fact that it combined the brevity of something like "sed" "awk" and "grep" with the power of "csh"
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: perl is just very versatile.  Would still be popular too if it weren't for that meddling Python! :-D
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Not an Imm Erikson Tech: Perl has the advantage that it's built into the language.  Writing regexes as strings rather than as a first-class syntatic element is painful when you're used to Doing It Right.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: escaping the escape characters is painful, I agree.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: so I've been wondering: What do most people do to manage their different damage types?  Do you just memorize the key spells or skills that have that damage type?  Or is there a better way with aliases or plugins?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Graciella Tech: dinv helps manage
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Not an Imm Erikson Tech: I just go warrior, that way there aren't skills or spells with different damage types   :p
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: for weapons maybe?  but what about skills/spells?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}High Risk Losteix Tech: i mostly just memorize my spells, and then let dinv equip damtype-specific weapons. 
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Graciella Tech: I just remember what spells/dam type
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Omphalon Tech: You can type spells <damtype> to figure out what spells you have that do that damage
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: fair enough, I am just new to playing psi and it seems a bit daunting
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: I use 2-letter aard-side aliases for each damtypes, and re-assign those as I get a better spell...so im is always my best fire, mi is always my best acid, si my best cold, etc. That way I can quickly find out an immune MOB's vulns by cycling through them without having to remember what alt I'm on, etc. 
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: yeah I was starting to do that too
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: and I have a client-side command that gives me the table of 2-letter aliases to damtype, in case I forget
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: but I was thinking a plugin could help. Does mushclient allow you to assign hotkeys?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: the particular letters I chose are mostly from my main character's mage life...mi-asma, im-molate, etc.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: yep
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: it calls self-assigned hotkeys "accelerators"
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: it has macros for usual keys, and accelerators let you use almost anything
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: ok thanks.  I was thinking of setting up something like F1=highest level spell, and then f2, f3, f4 etc. to cycle through other damage types
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: check out https://abelinc.me/macros for more info
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: one thing you'll need, is to change one thing in MUSH's global prefs, to allow you to use f1
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: otherwise it'll open up Help
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: Yeah I noticed that
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: would be nice if I created this as a plugin maybe, and had it autoassign spells to the F keys
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: file -> global prefs, there's a checkbox for f1/f6
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: in the "General" tab
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: that way as you level and you get a shiny new spell, F1 would always be that spell
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: there are 20 damtypes, so you'll need to use a modifier for some
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: does psi really have 20 damage types?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: the game does, doesn't matter what psi has...
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Not an Imm Erikson Tech: You just need a keyboard that goes up to F24.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: lol
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Etcha Sletch Tech: 2 keyboards side by side
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Veritheia Tech: you know, you could just check your effective level via gmcp data and cast the highest spell you can that way
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sath Tech: it does matter what psi has, cause he's looking to cast the best spell he has without immunities
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: the highest spell of your pclass that isn't area attack and not limited by other factors...regardless you'd be making a lookup table if doing it in plugin to auto-adjust
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Veritheia Tech: there's always the if/then :D
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: yeah so if you are multi-class and find something immune to fire, mental, and negative damage, you can borrow from another class
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: it doesn't matter, sath, as if a MOB is immune, you're looking to do damage regardless of your pclass
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sath Tech: I guess, though it depends what other classes you have, too
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Not an Imm Erikson Tech: Eh, if a mob is immune, I'm looking for a different mob   :p
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: litteral lol
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: you'll also want to incorporate something to swap weapons if you're going to go as far as to make a plugin
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Welwillend Welding Tech: 2021 and people dont know each mob damagetype vulns/immunities
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: if you're just leveling, that's an option
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: well I am new, that's my excuse
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sath Tech: it's a lot more overhead to swap weapons in a plugin :P
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: if you're trying to get past a guardian for something, or doing a goal, campaign, global quest, etc., then you may be more likely to push through
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sath Tech: my personal script keeps track of mob invulns and picks the highest level pclass spell that it's not invulnerable to
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sath Tech: it should probably back up to non-pclass spells, though
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Welwillend Welding Tech: im just giving you a hard time Radric, pay no mind. :p accelerators are of great use but personally there a couple specific damtypes that go through a vast majority of mobs so the need isnt particularly there, in my opinion.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: which are those?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Radric Tech: also, aren't there specifically vulnerabilities (not just invulnerabilities)?
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Sath Tech: it's a lot harder to notice those
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: often you'll find a MOB vuln to either AllPhysical or AllMagical, so the first move is to just swap from one of the 3 phys to one of the magical ones
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Welwillend Welding Tech: i think my info is more going into the vein of gametalk so I'll continue conversation via tells
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: and when you type "resist", the table of damtypes it gives is separated, with the top 3 before the blank being physical, all others being magical
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: for weapons, I'd look to see if dinv has an option to search for weapon based on damtype...that might make that part of it pretty trivial
T3/r7/2021-02-01.txt.gz:{chan ch=tech}High Risk Losteix Tech: "dinv weapon setname damtype"
T3/r7/2021-02-01.txt.gz:{chan ch=tech}High Risk Losteix Tech: and yes, that does make that part of it pretty trivial.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}High Risk Losteix Tech: although if you don't have the id wish, it can be a hassle keeping dinv up-to-date on what damtype each weapon you own does.
T3/r7/2021-02-01.txt.gz:{chan ch=tech}Tech: hmm, it shouldn't be limited by the wish, invdetails gives damtype
T3/r7/2021-02-01.txt.gz:{chan ch=tech}High Risk Losteix Tech: it was definitely the case back when i bought my id wish. that was a while ago though, so who knows.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Pestallel Tech: morning all ... does anyone have any experience with wordpress/mysql on server 2019 using IIS? i have a site that we're testing the installation of, but pageload times are 7+ seconds on average.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Pestallel Tech: I've tried getting wincache to run, i've tried re-doing the handler mappings, i've gotten dynamic content compression working ... nothing changes it in the slightest.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Torsin Tech: Sending: EnableGroup ("heal", false) to script doesn't work, but \\\EnableGroup ("heal", false) does. Aren't those the same?
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Pestallel Tech: what's the command for changing MUSH themes? I feel like a doof having to ask.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Pestallel Tech: alright so i figured it out. there's a fiendish plugin called "aardwolf_theme_controller". the command is "aard change theme"
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Pestallel Tech: nope. sorry. "aard theme change"
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Rynk Tech: what all does it change?
T3/r7/2021-02-02.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: WoW, this is cool, never knew 8)
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Pestallel Tech: the basic window colours
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Negader Tech: how do i change back to original, before i even attempt that?
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Pestallel Tech: might be to uninstall the plugin. i have zero idea
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Sheriff Shindo Tech: when you run the command a window appears with choices of themes, just remember which one you started with
T3/r7/2021-02-02.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Green neon is my favourite so far.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Sheriff Shindo Tech: it is highlighted
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Negader Tech: last time i did some commands, and it turned out bad. and had a hard time going back to way i had it before.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Green neon is my favourite so far.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Sheriff Shindo Tech: well there is always the option of making a full zip backup of the mushclient folder
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Pestallel Tech: if you'd like to read more: https://github.com/fiendish/aardwolfclientpackage/wiki/Miniwindow-Color-Themes
T3/r7/2021-02-02.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Sorry, mistype.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Negader Tech: that's a very cool function.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Rynk Tech: the green goblin.......
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Torsin Tech: How do I get dinv to know the dam type of my weapons?
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Durel Tech: you need the identify wish or you can do your build/refresh at "runto identify"
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Torsin Tech: Ah! Thanks!
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Durel Tech: the "runto identify" room costs gold to get the full identify, but it might be worth it
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Durel Tech: You get damtypes from the non-wish identify for owned items (like aard weapons)
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Torsin Tech: Will that identify all items or just weapons?
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Durel Tech: My recommendation is to go to "runto identify" then have dinv forget/reidentify just your weapons with something like this:  "dinv forget type weapon" followed by "dinv refresh all"
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Torsin Tech: Ok, cool! Thanks!
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Nohh Tech: i got the identify wish cause of dinv, no regerts
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Durel Tech: that will only impact non-aard weapons though.  Your aard weapons (or any owned weapon) will give the full identify info even if you don't have the wish
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Torsin Tech: Durel: Thanks, worked a trick!
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Tech: Durel smiles happily.
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Torsin Tech: CP mob eliminated!
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Ogreskull Tech: how do you do while(True) or other similar loop in shell?
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Ogreskull Tech: I know the basic construction of "while(1)do blabhlah;blahblah;done" just not sure how to have it just happen until interrupted easily
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Brobeo Tech: Which shell? bash?
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Ogreskull Tech: nvm
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Ogreskull Tech: yea
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Ogreskull Tech: i had while [true] , just needed while true
T3/r7/2021-02-02.txt.gz:{chan ch=tech}Ogreskull Tech: bash, I think, just SSHing into a machine and want to run a test :) all sorted out now
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Giddorah Tech: Hmmm... Do I have to id bonusloot equipment for dinv to pick them up, or is a refresh enough?
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Brobeo Tech: refresh is enough
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Giddorah Tech: Roger
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Pump the Fuel Tech: hm. win10 decided to set sleep in 1 hour idle. by itself
T3/r7/2021-02-03.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Heh, I am still on Windows 7 Ultimate.
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Pump the Fuel Tech: i may have reason not to make it "sleep". 
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Pump the Fuel Tech: and.. that makes me think what kinds of settings they are changin, ignoring the user
T3/r7/2021-02-03.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Anyone know what that means when you type "rd" in Mush ? [READY CHECK] You have initiated a ready check.
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Kers Tech: that's a social
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Tech: 1337 Gamer ZzZzZz goes, "OK".
T3/r7/2021-02-03.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Anyone got a RX 5500 XT ?
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Pumpkin Tech: there's never any GPU available for sale!
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Dixon Tech: lol I got a 3080 get gud
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Dixon Tech: text is ultra clear
T3/r7/2021-02-03.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: I maybe gonna go AMD Radeon brand next.
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Sath Tech: are there any public plugins that integrate with discord?
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Nohh Tech: pretty sure i saw one that would send a message to a discord channel but i don't remember who made it (think i read about it on the tech board?).. crowley has one that sends messages to telegram
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Pestallel Tech: i'm not sure what to look at ... i'm trying to have an alias use a portal with dinv portal use, and then run other commands afterwards. i know that creating an alias with dinv portal use requires it to be sent to "execute" ... but if i create an alias for the portal (like !fayke) sent to execute, then other commands afterwards, it doesn't actually use the portal in the first place.
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Pestallel Tech: nevermind, i've answered my own question. the whole thing needs to be execute, not sent to World.
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Sath Tech: if you have KEYLOOT on, you probably pick up lots of extra keys you don't need. I wrote a plugin that looks through your inventory+keyring, and drops any unkept items with duplicate names. Use "show duplicates" to see what the plugin wants to drop, and "drop duplicates" to drop those items. Plugin here, feedback very welcome: https://pastebin.com/y3NsSmNL
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Nohh Tech: well i'd say having to type 'show duplicates' and 'drop duplicates' is a bit unwieldy
T3/r7/2021-02-03.txt.gz:{chan ch=tech}Sath Tech: feel free to make an alias :)
T3/r7/2021-02-03.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: mushclient questions answered for a hot minute
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Feihu Tech: dont know how to edit mapper portal command ,can get higer effect ,
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Feihu Tech: such as:first make alias(mudside) get item of portal bag,wear item,enter,remove item ,put item bag
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Feihu Tech: then mapper portal alias
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Graciella Tech: do you use dinv?
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Graciella Tech: if so, it manages portals for you, and adjusts for tiers
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Big Boi Zyanya Tech: my bast spellup plugin is add non-spellup skills/spells. I've tried reinstalling it & xBroadcast_SpellsSkills. Does anyone know if there's a quick fix for this?
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Big Boi Zyanya Tech: adding*
T3/r7/2021-02-04.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Is 3Year garruntee on a GPU good?
T3/r7/2021-02-04.txt.gz:{chan ch=tech}{Linkdead} Garamis Tech: yeah
T3/r7/2021-02-04.txt.gz:{chan ch=tech}{Linkdead} Garamis Tech: usually they only come with 1 year included from manufacturer
T3/r7/2021-02-04.txt.gz:{chan ch=tech}{Linkdead} Garamis Tech: but iwouldnt pay extra for +2 year warranty
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Nokita Tech: can we put variable such as $1 in alias ?
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Nohh Tech: it's ariable_name
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Nohh Tech: sorry  @variable_name
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Nokita Tech: mm ok, is there a help doc for the syntax ? or any example :-)
T3/r7/2021-02-04.txt.gz:{chan ch=tech}Nohh Tech: https://www.gammon.com.au/forum/?id=8084
T3/r7/2021-02-05.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: what is the dinv "frequent item cache"?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}PenguinGod Galoth Tech: dinv usage?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: and?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}PenguinGod Galoth Tech: Ways to see what items you use and how often, alex
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Your Intuition Tech: cache for items we have lots of like potions. it recognizes some of those. Idea is to  not identify hundreds of them, they're all the same. If you were looking for more details than that, then not sure :P 
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Tech: IAC DO Fiendish thanks Your Intuition heartily.
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Selitos Tech: how do i execute a plugin cmd in a script?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Brobeo Tech: send to excute
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: Execute?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Selitos Tech: so execute("cmd")?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: Execute("cmd")
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Selitos Tech: and how do i get it to put text in my entry but not send it to the mud?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Torsin Tech: is there a way to set a trigger so a command is entered into the command line?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Nohh Tech: you mean send to Execute? so the commands that get run act like you typed them in the command line versus sending it directly to the MUD?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Nohh Tech: or do you mean it's just typed in the command line but not sent?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Torsin Tech: typed in command line, but not sent
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Torsin Tech: maybe not a good idea? Trying to think of a way to make those rooms with keys on mobs in front of locked doors smoother.
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Nohh Tech: there is a SetCommand(str) function, that only works if you command line is empty
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Torsin Tech: I like leaving the previous commands in the command line
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Tinypotato Tech: you could stash the command you want to execute in a variable that gets sent to execute when you press a hotkey
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Nohh Tech: PushCommand() then SendCommand
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Torsin Tech: That's a cool idea!
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Gofer Tech: is there a mudside command for word wrapping?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Radric Tech: I am not understanding the usage of DINV portal use <query>.  I type DINV portal use leadsTo Labyrinth, and it doesn't find the yoke.
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Nohh Tech: has it been properly identified?
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Radric Tech: oh i need to refresh!
T3/r7/2021-02-05.txt.gz:{chan ch=tech}Radric Tech: ok thanks
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Zolstead Tech: Is there a way to get the mushclient soundpack to play when the window is not focused?
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Useful Hadar Tech: i think one of the recent updates fixed that
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Useful Hadar Tech: yeah 2135 did so best bet is to update
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Zolstead Tech: Ok thanks.
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Ginevra Tech: Could anyone tell me, after installing the spcial Aardwold client, how to make my input text window bigger? When I drag it, it does not get bigger. 
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Brobeo Tech: Are you trying to make the font bigger or have it display multiple lines by default?
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Wanner Tech: game dropdown at the top, then configure then output, then there's an option for text
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Ginevra Tech: Where I type what I am inputting, I want it to be able to show multiple lines. At least two.
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Brobeo Tech: It will automatically expand if you enter enough text, not sure about getting it to always show multiple.
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Ginevra Tech: Dang, ok ty
T3/r7/2021-02-06.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Why do you want it to always show multiple lines?
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Ginevra Tech: It's just what I am used to when playing other Muds/Mushes. It feels too tiny.
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Ginevra Tech: Just looks wrong. lol
T3/r7/2021-02-06.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Ginevra: Try typing this in the command line, then resizing it to your preferred height: \\\SetOption("auto_resize_command_window", 0)
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Ginevra Tech: Wow ty!
T3/r7/2021-02-06.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Actually, even better... do: \\\SetOption("auto_resize_minimum_lines", 2)
T3/r7/2021-02-06.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: and go back to: \\\SetOption("auto_resize_command_window", 1) -- just to make sure it resizes properly again.
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Ginevra Tech: Yeppers, all works! TyTy appreciate it! 
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Tech: (Aleister) Crowley nods.
T3/r7/2021-02-06.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Oh, sweet. There is an option to default triggers and aliases to regexp.
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Nokita Tech: is it normal that I see tags in the room description and a map ?
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Sath Tech: help tags
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Nokita Tech: <MAPSTART> <MAPEND> and so on...
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Tech: depends on what client you're using
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: if you have tags on and you are not parsing them
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: help tags might be a good place to start
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Tech: typically, tags will be enabled by a plugin that uses them, and those plugins will gag it from being seen
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Tech: if you're suddenly seeing them and you had not been, and have not changed clients, then a script/plugin may have crashed and is no longer doing its job of hiding them. Restarting the client will usually fix that
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Nokita Tech: ok... it's disabling triggers that made them appear...
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Tech: yes, disabling triggers would definitely do that
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: the triggers would consume the tags so you wouldn't see them
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Tech: lots of stuff will break if you disable triggers entirely
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: specially if you are using aard mush.
T3/r7/2021-02-06.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: You can disable individual triggers or trigger groups if you need be, but rarely do you need to disable all triggers, since it affects plugins, too.
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Nokita Tech: ok thanks... i will look for the groups to do that
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Nokita Tech: it may do the job
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Tech: for triggers or trigger groups, those would be ones that you made yourself...for other things, you would usually be disabling particular plugins, so it depends on what trigger(s) you were looking to disable/what behavior you were trying to change
T3/r7/2021-02-06.txt.gz:{chan ch=tech}Nokita Tech: just my own triggers
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: how do you increase font size in mush?
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Ogreskull Tech: Configuration -> Appearance -> Output
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: thanks!
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: looked at it but didnt see the button
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: if it were a snake i would have been bitten
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Tech: Ogreskull giggles.
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Guinness Tech: if you use the find again button in mushclient is there a way to make it so the cursor stays at the button instead of moving itself to the middle of the screen?
T3/r7/2021-02-07.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: probably not
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Guinness Tech: sadness
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Etcha Sletch Tech: ctrl+shift+f?
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Guinness Tech: yeah i always forget that combo then i go for the button
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Guinness Tech: maybe i should just write it somewhere
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Guinness Tech: thank you sletch this is a good idea!
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Etcha Sletch Tech: np :) i've always liked keyboard shortcuts
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Etcha Sletch Tech: and here we all are, eh :)
T3/r7/2021-02-07.txt.gz:{chan ch=tech}Guinness Tech: indeed!
T3/r7/2021-02-08.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Come to think, gold in weight is cheaper then some top end GPU's.
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sheriff Shindo Tech: i doubt there is a GPU that weighs less than 28 grams but costs more than $2000
T3/r7/2021-02-08.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: OK, I take my statement back.
T3/r7/2021-02-08.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: integrated :P
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Tech: 1337 Gamer ZzZzZz looks at CheeZy Bot HiSaZuL and goes "Heh."
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Brobeo Tech: You measure gold in troy oz, so you have more then 31 grams to work with.
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sheriff Shindo Tech: if you're paying that for an integrated GPU you work for a goverment department that is laundering money
T3/r7/2021-02-08.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: dont they all do that?
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sheriff Shindo Tech: in some countries it is more prevelant than others...
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sheriff Shindo Tech: but that is a topic for the politics channel...
T3/r7/2021-02-08.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: on more serious note... government is where you would actually find intergrated gpus. tend to run some serious archaic stuff.
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sheriff Shindo Tech: other than every company hiring their laptops for staff
T3/r7/2021-02-08.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: if you look enough id wager youd still find some department or another running tapes for storage
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sheriff Shindo Tech: maybe even punch cards for software
T3/r7/2021-02-08.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: planes are another area with archaic tec. next time you fly keep in mind those things are the only place that still legit uses floppies
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Brobeo Tech: Banks are the best for ancient tech, I saw an ad recently seeking a COBOL programer.
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sheriff Shindo Tech: oh my hat...
T3/r7/2021-02-08.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: i guess its better then candle keeper :P
T3/r7/2021-02-08.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Candle Keeper, lol Year 1503
T3/r7/2021-02-08.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: I am picking up 5 wifi signals from my home, I wonder if I can hack into my neihnors Wifi
T3/r7/2021-02-08.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Is here any prior Nvidia users that converted to ATI ?
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: I have a regexp alias matching "^bid (\d+(\.\d+)?)([kKmM])$"
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: and it correctly matches the line "bid 1 100k"
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: but the third wildcare isn't "k", it's empty
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: wildcard*
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: anyone know why?
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: more specifically, the third wildcard is ""
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: oh is it my inner parenthetical group?
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Nohh Tech: the way it is now the kKmM is required.. you could try ([kKmM]?)
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: yeah that was it
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: I want it to be required
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: apparently inner parenthetical groups also have their own wildcards, didn't realize that
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: so I just needed to look at wildcard 4, which contains "k"
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Nohh Tech: oh okay i see.. you could make the group a non-capture group if you're never going to use it in the results
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: how do you do that?
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Nohh Tech: (?:...) the ?: makes it non-capture
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: ok, thanks
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Veritheia Tech: Sath, I don't know if you use it but regex101.com has a great tester that breaks down how your regex is being evaluated. In the case of the regex you posted, you're actually missing an entire matching group (the group that's supposed to capture the auction number).
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: what do you mean I'm missing the group that's supposed to capture the auction number? It's showing up in wc[1]
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: oh
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: no you're right, that one doesn't, that's intentional
T3/r7/2021-02-08.txt.gz:{chan ch=tech}Sath Tech: that alias is supposed to repeat an auction number from from the previous bid
T3/r7/2021-02-09.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: who here is white hat expert? i dont mean klan lol
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Giddorah Tech: Is there a command in dinv to see equipment that I've never touched?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Giddorah Tech: Is there a way to get a dinv search to show item id's?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: 1TP to anyone who knows where Red Nexus operates from. And I mean the group, not the companies
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: So I've got a ton of code in the form of scripts (non-plugins), and I'd like to start moving some of the functionality over to scripts. However, it's hard to do that piece by piece. For example, if I want to move a trigger from my script to a plugin, I don't know how to call/trigger code in the script from the plugin. Anyone have any tips for moving code to plugins one function at a time?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: You might as well be speaking hieroglypics to me lol :) 
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: I meant "move the functionality over to plugins)"
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: there's a plugin wizard
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: ripping out an entire plugin at once is sure to break everything
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: you want to move stuff you have into a plugin right?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: plugin wizard basically lets you pick whatever you want to move and generates a plugin out of it
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: I do, but it's code that's heavily integrated with the rest of my scripts
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: so if I get the boundary wrong, everything's going to break and I won't have anything to debug
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: you'll have plenty to debug, most likely from calls to something missing :p
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: but if you're worried about that, start with an empty plugin and start copyign stuff into it
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: that's what I'd like to do
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: but I don't know how
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: plugin wizard has an option not to delete it from whatever you have too
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: for example, I have some code that replaces a mob's room description with the mob's short name, along with some other info I've collected about the mob
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: what do you mean by 'code'. Trigger?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: script file
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: and triggers
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: and database
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: well, a few database tables
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: and some variables
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: so, maybe first I wanna just move the ROOMCHARS tag triggers over to the plugins
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: now that code will have to somehow get all the database data and variable data from the script file's environment
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: and any code that triggers when I see a certain mob (there's some stuff that triggers when I see a campaign or quest mob for example), I have no way of calling from the plugin
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: if I could use OnPluginBroadcast from my script file, then I could use the plugin broadcasting system as intended to get events out of the plugin and back into the script
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: but that's not supported
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: getting data into the plugin is equally hard, unless I just duplicate all of my data between the plugin and script file
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: but then I'm gonna have consistency issues
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: your data is in a database right? I assume something like sql. Your code reads that database? So basically just paste your code into the plugin, and you should be fine
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: maybe I need to start encapsulating my data within the script file until it gets to the point where I *can* use the plugin wizard
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: except then when I start getting new data that gets entered into the database, does the plugin handle that, or does the script file?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: one of them is gonna start to slip out of date
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: that's what I mean by consistency issues
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: i'd just sit down and spend a couple of hours to convert that function into a plugin, and only use the plugin
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rikuson Hakugen Tech: totally lost at what u trying to ask... exporting just trigger can be done at trigger interface...
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: this is potentially dozens of triggers and hundreds of lines of code that I'm talking about here
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Nohh Tech: i'm not sure how you're storing data in aliases/triggers that you think won't work exactly the same way in a script?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: ctrl c and ctrl v takes like 4 buttons and a few mouse clicks, so i don't see how lines of codes matter
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rikuson Hakugen Tech: if ur "database" is an actual database like .db file, then u will not have any issue
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: ...
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rikuson Hakugen Tech: but if u are talking about mush variable, then yes, u will need to use variable get and set
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: pretty much what hakugen says... it's the same language for both plugins and in the world
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: I'm talking about hundreds of lines of code and dozens of triggers/aliases, along with multiple variables and database tables
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: which integrates with many other features contained in my >10k lines of script
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: i think maybe the first step for you is to sit down and go through what you have, and figure out what sort of structure you want to make
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: a single plugin, or multiple small ones
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: and also make a copy of your mushclient folder as backup
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: if you want a single plugin, you could literally go to the plugin wizard and export everything into a plugin, and it should be fine
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Nohh Tech: sure would be nice if there was a way to interop between plugins that didn't have to serialize data into strings though
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: I guess that's true, if I wanted all of my code to go into a giant plugin, I could start pulling stuff out a little easier from there
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: you can use plugin broadcast to each other
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Sath Tech: I wish I could just use OnPluginBroadcast from a script file :P
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Redryn Tech: if the common thread is the roomchars triggers, then you should probably write a plugin that broadcasts info from there, and then update your various scripts to read that
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rosz Tech: Hi. sorry for interrupting, is there a way I can find starting room number of every area ?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rikuson Hakugen Tech: well... lazy way would be to get crowley's snd then rip the info from within
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rosz Tech: I am using tintin client, and look like I can only runto area by room number (using tintin mapper)
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rikuson Hakugen Tech: hmmm by room number? thoght u can just go to recall and just runto area?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rosz Tech: I want to use tintin mapper, it has a few built in feature like automatic portal. And it need the room id specified
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Nohh Tech: rosz, what hakugen said.. look at search and destroy's code for the default starting room IDs
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rosz Tech: nohh, is it the code for mush client plugin ?
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rikuson Hakugen Tech: is for mushclient plugin, but since its xml format, u can open with any text editor
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rikuson Hakugen Tech: room id is same regardless of client and os
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Nohh Tech: https://github.com/AardCrowley/Search-and-Destroy/blob/master/Search_and_Destroy.xml#L283
T3/r7/2021-02-09.txt.gz:{chan ch=tech}Rosz Tech: thank you this is exactly what I need :)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Drasik Tech: anyone familiar with mudlet and or gui's?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Will it become a problem if I have my tablet and Cellphone both plugged into PC via USB cable, like always?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Radric Tech: odd question, why would that be a problem?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: IDK, thats why I am asking ofcourse.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: not ideal to keep battery always charing
T3/r7/2021-02-10.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: charging*
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Radric Tech: tech oh you mean to keep then plugged in 24/7
T3/r7/2021-02-10.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Like it will not damage PC psu ?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: it would make no difference to pc
T3/r7/2021-02-10.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Awesome, ty yall.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Radric Tech: yeah no problems with PC, but the batteries on the mobile devices might slowly keep less and less of a charge.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: I understand, its just a hassle for me to unplug the devices and plugin when its needed to be charged, and the Batteries is dirt cheap so I dont see the need to unplug it all the time.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: But, was worried about PC troubles, but yall said its fine, then its fine :D
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Radric Tech: yeah if the batteries can be replaced it shouldn't matter.  I use IOS devices, and that is one crappy thing about them, batteries cost like $100 to replace and have to be done at apple store or an IFIX kind of place.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: its no different then having a mouse or headphones plugged as far as pc is concerned
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Tech: 1337 Gamer ZzZzZz nods at you.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: every time you need to do anything with apple stuff they charge you more then a new device
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Radric Tech: lol
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Radric Tech: I have to say that I do like the devices, but I may have bought my last one.  Not a fan of the company, and the products are just getting too expensive.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: yea, apple loves their replacement treadmill as much as gpu manufacturers if not more so.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: im having to dinv refresh after every time i die or xrt wont work
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: I've had the same issue, seems portals get messed up.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: That's just how DINV works unfortunately, since you are picking up the items off your corpse, it needs to relearn
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: ahh, that does make sense
T3/r7/2021-02-10.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: Specifically portals, in the case of xrt
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: don't die = no problem. got it
T3/r7/2021-02-10.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: Yup, solution is just don't die :-) 
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: sure, easy enough
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Tech: Torsin peers around tentatively.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Ogreskull Tech: you need to have an alias to reset your 'stat portal' as you level up if you have that wish, not sure if that's the underlying issue. 
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: What's 'stat portal'?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Ogreskull Tech: Like, DINV will fill your portal slot with the best stat stick you got if you let it
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Tech: Torsin nods.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: when sorting a mob list... sort by name or sort by area?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: depends on what you're trying to do with the list, I imagine.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: depends on what it's for.. if you're going to hunt them all down then definitely area, then preferably what part of the area... if you're just looking at a list of mobs, then probably by name
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: just display it, either sort is good, by name it bunches like mobs together, by area is more arbitrary because I number them as they are created
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: I think that it will be more encouraging by name, thanks for your help
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: you can sort by multiple things... sort by area keyword alphabetically, then alphabetically within the area
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: by name is also a tiny bit faster since it is already sorted naturally :) 
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: pfft it takes a fraction of a millisecond to sort any list you'll be displaying to someone
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: true, but it the sort requires another complete pass.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: the source is sorted by mob, so the first result is already sorted, if I sort by area, I have to go through the result.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: not saying it's not easier to write the code if you don't have to sort at all, but how long the sorting would take to run is not even a consideration unless you're sorting millions of things
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: I love LINQ :)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: you are right except that of the case "everything else being equal"
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: its especially easy if this is in C# and not lua
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: and there are enough mobs that the sort would run parellel on at least 2 cps
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: cpus*
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: lua is the front end, C# does all the heavy lifting
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: there's only like 14k mobs if we're talking about aardwolf
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: depends on how the db is maintained. Mine reads 33K+
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: rather than keep a open ended list of rooms, each time a mob appears in a distinct room it gets an entry. Later I can ask what mobs frequent which rooms (probably just to amuse myself)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: it helps in the situation when you get a mob name and a room, and there are multiple rooms with that name. The return is the rooms with that name frequented by the mob with that name.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: the monster case is a lion in Abend. There are over 50 rooms named Pridelands...
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: the intersection is only 4 :)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: I'd think proper db normalization would have you just make a table with mobids field pointing to the lion data and roomids rather than duplicating that lion 4 times, but whatever works for you
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: especially if it's already populated with a lot of data better to just go with it than think about changing anything
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: yes, I thought of that, but at the end the data was simpler to manage and it contained the same data. I have TBs of disk space so I opted for the slightly more wasteful way :)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: and it does help when it comes to other things like mapping out cps and gqs, because the required bits of data that I need are maintained in separate tables so they have more than one use.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: in the case of room cp/gqs i would have to use a x-join the other way, this way all I need is a filter on the return.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: not that I mind joins, I love them :>
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: talk to you again
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: happy coding
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: I can use dinv portal use crystal to go to Imperial Nation, and when I copy and paste that into mapper portal it doesn't work. Any ideas?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Areia Tech: Are you using mapper to run to the area?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Areia Tech: i.e., using mapper goto 1234 instead of runto imperial
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: I'm using S&D, so I use xrt imperial - works for all my other portals.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Areia Tech: Ah nodnod
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: mapper goto 16958 gets the crystal, holds it, and enters. Hmmmm....
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Areia Tech: And what does xrt imperial do?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Tinypotato Tech: try xset vidblain level <level of crystal>
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Areia Tech: Oh, weirdo S&D things.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: xrt imperial goes to reme and then runs to imperial nation
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: Tinypotato: will that change anything else?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Tinypotato Tech: it'll just tell s&d that once you pass level 80 you can use the portal to go to vidblain directly instead of the vidblain navigation hack
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: Oh, that's cool! I think you've got it then - thanks!
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: Worked! Thanks all!
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: getting a sendhia trivial portal is useful cause it's a level 1 portal and sendhia doesn't have a portal already (and sendhia is in vidblain)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: especially Tinypotato :)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: if you are 85+ star wars portal works :)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: What's a sendhia trivial portal?
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: help trivia portals
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: is custom portal to sendhian, 15tp
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: you can buy a portal to most zones with trivia points
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Areia Tech: Seemingly it didn't because S&D has some weirdo S&D thing that it does with Vidblain areas that doesn't involve direct mapper goto.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: Cool! I didn't know about that!
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: walk, the exercise will do you good :>
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Torsin Tech: Yeah, Areia, I believe so.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Tinypotato Tech: you can't mapper goto vidblain areas directly without a portal so S&D has custom functionality to enter the star, then execute mapper goto after entering the area
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Tech: Torsin chuckels.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Tech: Areia nods at Tinypotato.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: well because vidblain drops you at random, mapper can't run to rooms inside there by default
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Tech: Torsin nods.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: there is no direct way to get to vidblain.
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: with gmcp the randomness is just annoying, before gmcp...
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: sure there is.. speedwalks vidblain
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: it is a methodology to get to vidblain, it requires a pause and a trigger :)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: it is easier than running to the lamp in Sho'aram :)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: inside the lamp, that is
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: can cexit that no problem its just a long wait
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Nohh Tech: have to adjust the cexit timeout before creating it and add a wait(N) into the cexit
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Sath Tech: I think wait(N) automatically adjusts the cexit timeout
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: if you survive you get 2 portals :)
T3/r7/2021-02-10.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: mis
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: alright, i just moved everything via thumb drive from old laptop to new laptop
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: however, where can i find stored passwords for websites?
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: bahahahaha got it
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: just had to synch
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: Is there a seek and destroy that works with Mudlet?
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Talbor Tech: not as far as i know. Plugins is the reason why I switch from mudlet. 
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: I see. I'm using the mush plugin for mudlet. I guess I really need to mess with Wine after all.
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Talbor Tech: too many good plugins for mush. You should give it a try to see if you like it
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Talbor Tech: oh you're on linux
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Tech: Perryn nods.
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Talbor Tech: Not familiar with that, but try asking later since there's a few who use it. Won't mush work with wine too?
T3/r7/2021-02-11.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: Yes, it will...but wine tends to be a PITA
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: I think mush will work with Wine, but first I have to get Wine which has been a headache everytime.
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Useful Hadar Tech: yeah fiendish does everything on linux for mush
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: so he is the person to ask?
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Talbor Tech: He'd be able to help you then. Watch for him to pop in for Mush question or maybe send him a note
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: Thanks!
T3/r7/2021-02-11.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: If you have enough headaches with Win, Perryn, you could always try a Windows 10 running in virtualbox.  I've had much success with that
T3/r7/2021-02-11.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: with wine*
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Talbor Tech: Didn't think of that
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: I'll have to look into that. I thought with a virtual it would make everything really laggy.
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Torkin Tech: does aardwolf note formatter freeze up and become unresponsive for anyone else sometimes
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: Teacup was amazing and helped me install wine and lutris, so now I am running native client!
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: question now, is there a way to turn on the +- indicators when considering mobs?
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Nohh Tech: maybe you mean an addon like this one: http://www.gammon.com.au/forum/?id=10299
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Nohh Tech: makes consider lines look like: (R) A kobold crusader chuckles at the thought of you fighting him. (+5 to +9)
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Nohh Tech: also colors them
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Bloodspatter Tech: Or you could find out if you could take out a "chuckles at the thought [..]" and then decide which mobs to kill.
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Bloodspatter Tech: Why tech something that doesn't need it?`
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: because... tech... :)
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Nohh Tech: agree 100% thats why i play through telnet
T3/r7/2021-02-11.txt.gz:{chan ch=tech}Perryn Tech: I'll look at that addon - thank you. But bloodspatter does have a point haha
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Tech: 1337 Gamer ZzZzZz snickers softly.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: miss
T3/r7/2021-02-12.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: How can I set Dinv to always Dual wield and not use held items? 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}KnightLord Throxx Tech: turn off the shield slot in your priority
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: edit in full mode, you can turn off slots entirely
T3/r7/2021-02-12.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Is there something I must type?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: its like dinv priority edit blahblah full
T3/r7/2021-02-12.txt.gz:{chan ch=tech}KnightLord Throxx Tech: change from 0 to 1 or 1 to 0
T3/r7/2021-02-12.txt.gz:{chan ch=tech}KnightLord Throxx Tech: its says it in the full 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Yup, but what must I type, dinv priority edit ?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: yeah
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: dinv priority edit warrior full
T3/r7/2021-02-12.txt.gz:{chan ch=tech}KnightLord Throxx Tech: is in: dinv help priority
T3/r7/2021-02-12.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: OK, ty all !!
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: that will always show all the options, even if they are 0/off
T3/r7/2021-02-12.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: I used, dinv priority edit warrior full, then it placed aard amulet and use Train ticket X_X. I have dual Aard weapon I an usem but it dont wanna
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Contigo Tech: do you have dual wield
T3/r7/2021-02-12.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: AHH, its wearing a dumb lvl 41 glove instead of Aard ones.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: change the priority and add value to dual wield
T3/r7/2021-02-12.txt.gz:{chan ch=tech}KnightLord Throxx Tech: dinv refresh all, at hester if you dont have the id wish
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: just give dualwield priority 99 or more depending on your priority numbers
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: for aard pieces you can force those too
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Tech: 1337 Gamer ZzZzZz nods.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: OK, its working, bey bey.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: i also force aard bracers, gloves, bp and aura :P
T3/r7/2021-02-12.txt.gz:{chan ch=tech}KnightLord Throxx Tech: i had a problem getting div to use my max tp enchanted weapons, i had to made the dr setting  = the avg dmg setting
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: yeah hr/dr vs dmg is matter of fine tuning
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: then throw mastery into the mix
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: or hammerswing... stupid hammer forging limits
T3/r7/2021-02-12.txt.gz:{chan ch=tech}KnightLord Throxx Tech: i made a max tempering priority
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: there is limit on amount of hammers?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: amount no, but the weapon has to be metal
T3/r7/2021-02-12.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: Ohhh yea... that, yeah not a fan :P
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: only one of my level 200ish > aard weapons is metal, dinv really wants to use titanic weapons and random wood weapons
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Rosz Tech: hi. is there some ways I can check multiple inventory/equipment items id like 'keyring data' ?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: like.. invdata?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Rosz Tech: perfect. thank you. how about equiped items ? I just need to remove them and use the same command ?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: eqdata
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Rosz Tech: yeah thank you
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Selitos Tech: how do i get the mapper to not go to past the aggro machine to tp out in lemdagor? I have them all the rooms set as norecall/notp but it allways runs to thr same room with the aggro mob, how do i get it to pick a different tp room?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Giddorah Tech: Hehe... Those damn living weapons...
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Selitos Tech: if i move manually closer to another oom it will use the other...how do i get it to ignore the aggroo room?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}High Risk Losteix Tech: i usually just set exit level locks around rooms i don't want to run through.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}[Battle] Scars Tech: mapper norecall [roomid] true
T3/r7/2021-02-12.txt.gz:{chan ch=tech}[Battle] Scars Tech: and noportal it or whatever
T3/r7/2021-02-12.txt.gz:{chan ch=tech}[Battle] Scars Tech: mapper will ignore that as an exit route
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Selitos Tech: just set the room manuall as norecall, couldn't remember how to do that
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Giddorah Tech: Yeah, noportal the room south of the living weapon
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Selitos Tech: cool thanks
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Selitos Tech: yeah it worked  :)
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Tech: 1337 Gamer ZzZzZz thanks you heartily. 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Midway Tech: I had a plugin to see people in an area, but format and now I dont remember it. Anyone know of any?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Mique Tech: command where
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Princess Alison Tech: My GMCP mapper seems "stuck"
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Princess Alison Tech: It's listing me as in the room I was in when I logged on, and refuses to update
T3/r7/2021-02-12.txt.gz:{chan ch=tech}PenguinGod Galoth Tech: reinstall?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Mique Tech: try to quit and come back
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Midway Tech: i get bast plugin stats, how do i hide the old?train
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Midway Tech: i see it statmon
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Princess Alison Tech: Still stuck :(
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: is there a way that dinv can sort damage types on weapons or does that have to be done manually?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Selitos Tech: is there a cmd I can type to select the next mob on the cp list I want to go after for S&D? or do i have to mouse click it?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Brobeo Tech: I think xcp # works
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Selitos Tech: great that works, i hate clicking the mouse all the time
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Tech: Torsin is agreeing with that Brobeo person again...
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Torsin Tech: Agreed, xcp # is nice.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Selitos Tech: you can alway ask on tech line too, they are very helpful with the software stuff
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Selitos Tech: heh misline  :)
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: I could! I'm trying to install pwar's plugin manager - I moved into the plugin folder of client, then went to file > plugins > add... it threw an error "Line   99: Error parsing script (Cannot load)"
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: any ideas on what I'm doing wrong?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: put zip.dll in the root mush folder
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: there's direction on our site and on his github wiki I believe
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: think you just unzip to main folder 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: root folder being plugins?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: no, mushclient root folder
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: or root for the whole client?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: nope unzip to main mush folder iirc and it'll put it where it needs to go
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: trying to find directions for ya but my laptop is ungodly slow
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: https://aardwolfboot.com/plugins/
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: it tells you there
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: Thanks! I didn't realize there was a plugins page on boot.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Tech: Perryn looks around and whistles innocently.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: that take care of it?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: you're welcome
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Talbor Tech: Me neither when i first tried. I had mush all messed up a few times before I found it
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: sorry, I had to go afk for a minute. I'm still getting the error after I try adding it again.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Midway Tech: I cant get the PotionQuafferv3 & v2 to work. Never drink potions, i put healdesc 90, manadesc 90. Ive tried potions in and out of the bag. Any idea? 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Midway Tech: hp & mp commands still works
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Sivak Tech: I been using individual plugins for everything basicly I think bast quaffer qff
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: i don't know anything about that plugin or i'd try to help ya
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Midway Tech: yes v2 is bast quaffer
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Sivak Tech: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjn-bLeueXuAhVR1VkKHczUDG4QFjAAegQIAhAC&url=https%3A%2F%2Fgithub.com%2Faardwolf-lunk%2FMUSHclient-Aardwolf-Autoquaffer&usg=AOvVaw0JKUc0BGnHHP0twt0K8jSJ
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Sivak Tech: christe why do they make links so long
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Midway Tech: that if it works for me, although I wanted the others because they have more options
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Gildar Tech: I think the URL is so long due to the google reference piece to track who clicks what but that's only a guess, Sivak :)
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Tech: Exiled To Aphelion . o O ( get a room in the pizza joint )
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: mis!
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Jowlem Tech: how would i make this alises work.    "alias is" setportal * "send is" mapper portal get %1 2428971681;wear %1;enter;wear 'old duffle';put %1 2428971681 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Jowlem Tech: ive tried with with 2 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: You need setportal * *
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Jowlem Tech: ok. 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: wait, what do you mean you tried 2
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: you don't have a %2 so nevermind
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: make sure you clicked the expand variables box
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Jowlem Tech: oh lol it didnt show.  i meant the semi colons.  ive tried 2 and tried with 1 between each commands
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Jowlem Tech: ok will try that.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: You need to have two, make sure expand variables is checked, and set the sendto to "execute"
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Jowlem Tech: ahh that worked.  Thank you
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: Any time you need your client to parse a command (i.e. interact with plugins, etc.) you need to send to execute
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Jowlem Tech: ok.  yea i looked at the list but didnt know what i was really looking at. 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: there's basically 3 that you need to be concerned with: send to world, send to execute, and send to script. I'm sure there's uses for the others but I haven't found one yet
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Jowlem Tech: anytime i use the * and %1 do i need to have the expand varibles checked? 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: yes
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Jowlem Tech: ok, thank you. 
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Sath Tech: no
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Sath Tech: those are wildcards, variables are something different that use notation
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Sath Tech: @ notation
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: ah yeah, that's right
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Summoner Yuna Tech: Mapper won't let me use clan recall (with the command recall) as my bouncerecall. Is it because it doesn't actually go to recall? Ho wdo I set it up as my bouncerecall?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: you need to set it as recallcommand first
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: portalrecall*
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Summoner Yuna Tech: Aaah, that's what I'd forgotten to do. Thanks.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: I'm trying to install pwar's plugin manager - I unzipped it to the root folder of client, then went to file > plugins > add... it threw an error "Line   99: Error parsing script (Cannot load)"
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Areia Tech: How did you download it?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: what else does it say
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: also, make sure zip.dll is in mush root folder
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: I believe I downloaded it from here https://github.com/hudmond/ppm/raw/master/Pwars_Plugin_Manager_v1.33.zip
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: okay, what else does the error say other than cannot load?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Areia Tech: Ah, okay, probably have the right things then. Sometimes people download the webpage instead of the plugin.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Useful Hadar Tech: and thats why i moved away from pwars version of a plugin manager lol
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Mannec Tech: i use a spiral-bound notebook and mechanical pencil.  never have any wierd dll issues :p
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: Error #2: Lead not found
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: There was a problem loading the plugin Z:\....\MushClient\worlds\plugins\Pwars_Plugin_Manager.xml. See the output window for more details
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Mannec Tech: terrible irony of course being that without lead, pencil cannot report errors...
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: trapped in their own wooden bodies, so sad
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Useful Hadar Tech: i like to write my scripts in an etch a sketch
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Nohh Tech: maybe you just unzipped it into the wrong folder perryn
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Mannec Tech: wood? for a pencil? how ... quaint.
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: is the zip.dll itself supposed to be in the root folder or still in its folder in the root folder?
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Veritheia Tech: it should be in the root mush folder
T3/r7/2021-02-12.txt.gz:{chan ch=tech}Perryn Tech: solved I unzipped the folder to the root folder but the dll stayed inside unzipped folder. Thanks!
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Jowlem Tech: anyone know how to fix snd/mapper for trying to get to the ascent area.   it runs me to jotun then runs south and errors out eventually.  ive tried going to the last room where it keeps triyng to go south and purge it but that didnt help
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Veritheia Tech: Did you add the customexit to get into ascent?
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Jowlem Tech: i walked it and did the climb cexit.  but it doesnt even try to go that way. 
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Veritheia Tech: did you add the custom exit to the mapper?
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Jowlem Tech: yes
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Ogreskull Tech: look at all your custom exits in aylor and see if you have any ones besides the correct one going to ascent
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Jowlem Tech: right now.  it does  runto jotun, run 8s4w.     it errors at the 8s
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Jowlem Tech: k
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Jowlem Tech: hmm there's one for runto jotun for some reason. lemme delete that and try
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Ogreskull Tech: you can do "mapper cexits aylor" and then the Jotunheim rooms look liek they're in the 315xx range, while the first ascen room ids look liek they're in the 432xx range, so maybe that is good? just a suggestion. 
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Ogreskull Tech: cool cool
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Ogreskull Tech: cexits count as "0" steps so they will always be preferred
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Veritheia Tech: That's not why they're preferred but they are preferred, yes
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Jowlem Tech: ok cool.  works now.  not sure why i had that runto jotun cexit.   guess i mistyped something in the last day or two
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Jowlem Tech: thanks
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Veritheia Tech: The mapper orders exits by string length. That's why custom exits are preferred, by the way.
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Jowlem Tech: ok
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Ogreskull Tech: ah cool
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Negader Tech: is there a diff between for k, v in pairs(tableName), and for k, v in ipairs(tableName) ?
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Veritheia Tech: https://stackoverflow.com/questions/55108794/what-is-the-difference-of-pairs-vs-ipairs-in-lua/55109411
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Veritheia Tech: https://www.lua.org/pil/7.3.html
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Negader Tech: thanks
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Areia Tech: Shouldn't require "aard_lua_extras".PackageVersionFull() return something like 2345_VI if the user's running the no-visuals version of Mush? Or am I reading that function wrongly?
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Princess Alison Tech: my GMCP mapper has been screwing up, so I reinstalled it. I get this message when I try: https://pastebin.com/mX1e2bHf
T3/r7/2021-02-13.txt.gz:{chan ch=tech}Princess Alison Tech: Does anyone have any insight as to what that message means?
T3/r7/2021-02-13.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Seems to mean your mapper database got corrupted and failed the integrity check.
T3/r7/2021-02-13.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Did you make any changes to your Aardwolf.db file directly?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Abraxos Tech: i'm using MUSH and all triggers, aliases, mapper areas, hotkeys are gone... everything is gone.  Is there any way to get it back?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Radric Tech: is there a way to make SnD use portals if you have them?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Exa Tech: mapper help portals, add them there it should automatically use the portals then
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Radric Tech: thanks!
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Radric Tech: wow that's a lot of functionality...
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tallimos Tech: I was told there is a GMCPdebug in mush. does anybody know how to enable this?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: Tallimos you can enable it with gmcpdebug 1 or gmcpdbug 2
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tallimos Tech: thank you
T3/r7/2021-02-14.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: setting it to 0 turns it back off
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: Tallimos smiles happily.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: MUSHclient questions answered here
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: you know of a good way to trigger code in a non-plugin user script from a plugin? Aliases seem a bit buggy
T3/r7/2021-02-14.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Does mush work on Windows 95 ?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: no
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: current builds of mushclient require windows XP or higher
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: 1337 Gamer ZzZzZz nods.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: Sath: clarify buggy?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Negader Tech: on your easy mini-win site, i don't see how you add a clickable 'x' to close out a created mini-win. or did i not just see it?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: Negader: it's the "is_temporary" creation argument
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: Sometimes it eats lines so that they aren't matched by triggers. I think something about the output buffer line count gets messed up, I had to add a blank Note() to get the lines from Aardwolf to get matched by triggers
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: "   is_temporary,          -- boolean, optional (default is false), true adds a close button in the top left"
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: though I think it will be an ! and not an X
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Negader Tech: thank you. i'll try that.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: anyway, you know of another way?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: hmm
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: off the top of my head, I think the most obvious way would be to move the functions you want to use into their own .lua file in the lua folder and then require that file both in your world script and also in the plugin
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: that works for some things, but there's a lot of data that different modules need to access from each other
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: ah, yeah, it won't let you share variables
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: hmm
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: I think CallPlugin does not let you call into the world space but you could try anyway
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: what argument would I give it?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: does the world script have a plugin ID?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: GetWorldID()
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: hm, ok, I'll take a look
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: I think it won't work (which I dislike)
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: you could move all of your world stuff into a plugin and then it will work
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: have you seen/looked into ppi?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: I've never bothered looking into it
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: doesn't seem to work
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: not surprised
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: CallPlugin(GetWorldID(), "command_queue_empied") right?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: I've got it working for one thing that I was messing with... returning a value from a function in another plugin.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: if it were going to work that would be it yes
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: returning values from plugins is easy because you can get plugin variables. the world script space is walled off though
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: Yes, THAT Xyzzy goes, "Ohhh, that makes sense now!"
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: yeah, fortunately it makes it really hard to refactor from scripts into plugins
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: most of the world stuff I've worried about has a built-in to handle.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: I've definitely hit my head against that wall before
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: my only solution is to pull the entire script into a plugin so that I can use callplugin and onpluginbroadcast both directions
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: but I don't love that idea
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: when making the #sub/gag plugin I originally wanted all the match patterns to go into world variables but it wasn't possible at the time
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: I honestly don't know why Nick didn't make the world space symmetrical to the plugin spaces
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tallimos Tech: I am not great with technical terms so I am sorry if what you are discussing answers this question. But if I have a function in a plugin that returns something can I call it from another plugin and use it instead of copying the entire function into the other plugin file?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: Tallimos yes, with CallPlugin
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tallimos Tech: ok thank you, I was not 100% sure. I would always copy the function
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: CallPlugin says "Hey other plugin, do some work for me and tell me what you get"
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: there are limitations
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: it can only return simple types like numbers and text, not tables
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tallimos Tech: oh, that could be an issue
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: so if you need a table you have to "serialize" it first into text
T3/r7/2021-02-14.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: can it win at slots?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: However, if your plugin stores that as a variable, you can call the plugin variable for that information.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: the easiest way to serialize simple tables is with the json module
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Or do the serialize
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: (Aleister) Crowley nods at IAC DO Fiendish.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tallimos Tech: what were you saying about putting functions into a lua file
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: the json serialization interface is much more intuitive than the serialize module
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: neat, didn't know there was a json module
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: Tallimos: Lua can "require" (import) other Lua files
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: So you can compartmentalize your functions and then reuse them in many places
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: I use json quite a bit in my Melvin bot.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tallimos Tech: Is that limited like callplugin as well? i.e. cannot return a table?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: json.encode and json.decode accept and returing strings in the obvious way?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Pulls info from the web in json format and returns it in readible format.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: Sath: the json module is used for GMCP decoding
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: (Aleister) Crowley nods at Sath.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: 'melvin, get weather for 13219'
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: [Melvin]: Syracuse, NY 13219, USA: Light Snow Temp: 25F (-3.9C) Feels like: 16F (-8.9C) Humidity: 74%  Wind: W at 7 mph. Visibility: 9 miles. Cloud cover: 100% Current time: 15:01
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Sath Tech: that's a really good one
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: Tallimos: it works differently because if you CallPlugin to another plugin then the code gets run _by_ the other plugin, meaning all of the other plugin's state is active when the code is running. But if you import some code then it runs locally instead of in some other plugin
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tallimos Tech: So that means that I can put function in a lua file, require it in a plugin and have it return tables or whatever I want?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Your Intuition Tech: yes If that lua file cna compute whatever you want from the caller plugin and not from another plugin that happens to use the same lua file.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: so its actually warmer in syracuse than central TX? street craps that seems like an anomaly to me. 
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: 'melvin, get weather for 82007'
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: [Melvin]: Cheyenne, WY 82007, USA: Haze Temp: -9F (-22.8C) Feels like: -26F (-32.2C) Humidity: 70%  Wind: S at 9 mph. Visibility: 4 miles. Cloud cover: 50% Current time: 13:04
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: (Aleister) Crowley chuckles politely.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tallimos Tech: Thanks everyone
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Giddorah Tech: melvin, get weather for Sweden
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Gotta use quotes. Tech doesn't send the quotes like other channels.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: Tallimos: which one you do depends on who (which plugin) you want to run the code
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Giddorah Tech: 'melvin, get weather for Sweden'
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: a good example of calling a Lua file is the "commas.lua" file that ships with MUSHclient, which has some nice number and time functions
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: But for everyone else, it sends it in a tell anyway. :P You can always send a tell to me for Melvin commands, too.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Giddorah Tech: Oh! It sends a tell? Nice :)
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: quotes?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: wait
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Yeah. I did it that way to prevent people from spamming channels.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: it doesn't use gmcp?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Fiendish: It does use GMCP, but I started using the quote as a marker instead of trying to account for every channel variation.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: IAC DO Fiendish sits down and thinks deeply. 
T3/r7/2021-02-14.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: strip all color codes and punctuation?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: even with GMCP the quotes are present in other channels and not in tech
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: For example, gmcp for tell does: Player tells you '. gmcp for tech does: Player Tech: yadda... and gmcp for clan is: Player (rank) tells the CLAN: ...
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: So instead of trying to match it to all those, I just use quotes.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Tech: GMCP gives player separately as a field, but for the channel message sends effectively all of what gets sent to screen, including <player> <channel>...it would probably be good if GMCP could have a field for just the "meat" of the message, but then you'd have weird stuff like how to handle emotes and socials
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Khrysis Tech: is there an updated version of the considerwindow plugin that can tell 2.mob 3.mob for same name mobs?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Probably only in secret.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: wouldn't be too difficult to add to the one that's available, but it could be quite error prone without a proper list of keywords
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Khrysis Tech: haha ya i get the concept of how to do it but ya i am not good enough at it to make the changes myself lol
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Spronktar Tech: -5 10
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Spronktar Tech: ...disregard that
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: i'm sure you could do it, it'd just take time
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Jowlem Tech: if the keyword that snd uses doesnt work for the mob.  is there a way to change it for that specific mob?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: not without changing the code
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: some mobs just are just missing keywords that really probably should have
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Jowlem Tech: ok,  figured as much
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: I'm switching to a new computer - what's the best way to import triggers/aliases/plugins quickly?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: And settings in general - things like font size, etc.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: Copy the whole aard mush folder is the quickest way to grab everything
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Mohan Tech: I always move complete folder and set again settings
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: Yeah, I tried that. It's corrupted. Works on my laptop, but when I copy it over, it screws up.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: I have an intact mapper file, and my plugins/aliases/triggers look intact.
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Mohan Tech: strange, normally works, are copying it in your programs place folders?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: Programs place folders?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}<<legion>> Slips Tech: check the ingame alias
T3/r7/2021-02-14.txt.gz:{chan ch=tech}<<legion>> Slips Tech: mush runs one and saard can make an ingame by typing alias
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Mohan Tech: somenthign like thos place C:\Program Files (x86)
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: Nah - I usually have MUSH on my desktop. I did it on the laptop too
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Mohan Tech: all folder?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: No, desktop. The MUSHclient folder itself
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Mohan Tech: do you have partions in your pc?, normally it doesn't works properly when you have em in same partition where you have programs installed
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: i think most of those settings are stored in the worlds/Aardwolf.mcl file... if you copy over your entire mushclient folder i'd expect the settings to transfer over alright
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: Hm, I'll try that. Thanks Mohan and Nohh
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: it's designed to be a portable executable
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Mohan Tech: I think another thing is: you need to give to folder all permisions clicking right and editing in security
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: Okay, I think I've gotten the aliases/triggers down
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: Any way to quick-import plugins? Even if I copy the old plugins folder, I still have to reinstall them
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: plugins are also included in the aardwolf.mcl file, not sure why they wouldn't be loaded properly if you just copied the entire Mushclient folder over
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: Where is Aardwolf.mcl?
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: my mushclient for is D:\Downloads\AardwolfClient...  the aardwolf.mcl is D:\Downloads\AardwolfClient\worlds\Aardwolf.mcl
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: if I just copied that AardwolfClient over to anywhere i'd expect everything to work the same.. that's what i did for an alt character and also for testport
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: I don't have an .mcl at all
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Princess Alison Tech: I only have aardwolf world file, aardwolf no visuals world file, and a tmp file
T3/r7/2021-02-14.txt.gz:{chan ch=tech}Nohh Tech: well it is the aardwolf world file
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Amakuni Tech: hey how.. can i use the buttons on the keypad normally without disabling the keybidings?
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Jowlem Tech: you mean for typing numbers?
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Amakuni Tech: mainly for the asterisk
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Amakuni Tech: mainly for the asterisk
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Amakuni Tech: mainly for the asterisk
T3/r7/2021-02-15.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: You don't want to hit Shift-8 on the number row?
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Jowlem Tech: you could set so when you hold crtl they type the actually number and or *   at the button there is a hold ctrl button you can click
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Amakuni Tech: that did it thanks
T3/r7/2021-02-15.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Heh, who knew? Holding shift down would let you hit the * instead of the macro. *shifty*
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Jowlem Tech: oh yea it does.  doesnt work on the numbers tho.  hmm
T3/r7/2021-02-15.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: I always just use the number row for my own use. You could do it script-wise, but that's a bit more complex than just hitting number row keys.
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: how would I import my dinv data from another mush install?
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: not seeing a db file
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Sath Tech: the data is stored in a state file
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Sath Tech: contained in the mushclient/worlds/plugins/state folder
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Ogreskull Tech: if you dinv data is just your inventory (i.e. you don't have a bunch of custom stuff you've added) you can just build fresh
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Ogreskull Tech: just FYI depending on how much you're trying to port over, the initial build doesn't take _that_ long
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: I do have quite a bit of custom stuff
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: theoretically i could install and drop state file in?
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Sath Tech: I'm not sure
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Amakuni Tech: is the mapper db stored locally?
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Areia Tech: Yes, in Aardwolf.db
T3/r7/2021-02-15.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: That should work, Yajan, yes. But you can do a backup and restore from it, too.
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: kk I'll give it a shot.. looks like it has its own area in the state folder
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Tech: (Aleister) Crowley nods at Yajan.
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: ok, I'll go backup/restore if it doesn't work
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: good to know if drag/drop works
T3/r7/2021-02-15.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Don't drag/drop. That moves it. You should right-click, copy, and paste.
T3/r7/2021-02-15.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: Always keep an old copy just in case things go awry.
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: haha, I know - thanks though! Was just calling it drag and rop
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: drop*
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Tech: (Aleister) Crowley nods.
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: appears to have worked to overwrite state folder produced on install with the one from the previous installation
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Yajan Tech: thanks for the help all!
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Jowlem Tech: yea dont lose your mapper database like i did.  it sucks having to go back and remap everything :(
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Selitos Tech: how do i get mushclient to echo cmds?
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Amakuni Tech: ^
T3/r7/2021-02-15.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: echo command
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Amakuni Tech: thanks from me too o/
T3/r7/2021-02-15.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: okay which one of you knuckle heads thought to come up with usb c? you know how hard it is for a VI person to match the right cables? lol
T3/r7/2021-02-15.txt.gz:{chan ch=tech}AnN0yiNg Eadric Tech: if iw ant to ping to the mud server, where should i ping to? aardwolf.com?
T3/r7/2021-02-15.txt.gz:{chan ch=tech}Sheriff Shindo Tech: aardmud.org
T3/r7/2021-02-15.txt.gz:{chan ch=tech}AnN0yiNg Eadric Tech: thx
T3/r7/2021-02-16.txt.gz:{chan ch=tech}1337 Gamer ZzZzZz Tech: Everytime I die, I need to refresh Dinv, or else it doesnt equip correct/all gear... I wonder why.
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Amakuni Tech: is the s&d plugin brkone?
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Torsin Tech: Which one?
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Amakuni Tech: search and destroy
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Torsin Tech: There are a few different ones made by different people, which one do you use?
T3/r7/2021-02-16.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: there are a few different snd sources. some are too outdated and buggy.
T3/r7/2021-02-16.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: crowley is current and the only one that is getting updated.
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Tech: Torsin nods. That's what I use & it's been pretty good.
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Amakuni Tech: winkle winkle 2.8
T3/r7/2021-02-16.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: that is about 10 years too old.
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Amakuni Tech: gotta check it out latter
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Amakuni Tech: later*
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: i died and now xrt is saying there was a previous error in xrun-to
T3/r7/2021-02-16.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: i am lagging so badly, it is something broken with xrt
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Varkiann Tech: This client doesn?t send a carriage return after my commands. Any way to make the MUD send one? Can I add one the end of the prompt?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Varkiann Tech: Found it in help, nvm :)
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: hey.. something is ouputting help help help almost every line which is acommpanied by ticks i think
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: any idea how can i fix that.. 
T3/r7/2021-02-17.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: do you by any chance run basts stuff?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: the help ouput triggers after every moment and on trace i don't see anything weird.. can't play like this T,T
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: movement*
T3/r7/2021-02-17.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: did you reboot client?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: yup.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: after disabling the plugins
T3/r7/2021-02-17.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: did you check your triggers and movement aliases/keybindings
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: are there server triggers ?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: cause i don't see anything out of the ordinary in the client
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: is an ouput not an input but i don't understand what's trigetting it.. happens after every command movement
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Yes Sir! Trurien Tech: I'm trying to wrap daily blessing output into a neat ASCII box... how can I get rid of blank lines within the default output?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: no idea what broke my client but T,T
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: anyone knows a way to ignore an specific a output or mute it or gag it or something
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: killed it with a trigger but.. i don't think that's a solution T,T
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Talbor Tech: you could back up mapper & maybe alias/triggers if you have many and start with a fresh Mush install
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: that's a way to fix it but i'd like to know why.. haha 
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Perryn Tech: when trying use snd to get to the ascent I get the message "No route found within 300 rooms, defaulting to start room 43161 for ascent Unable to find path..." what's causing that?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}[Outlaw] Mendaloth Tech: The mapper doesn't know how to get there.  That means there is probably a custom exit you need to add.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}[Outlaw] Mendaloth Tech: Use the mudside "speedwalk" command to figure out where that is and add it using the Mushclient mapper.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Perryn Tech: thank you
T3/r7/2021-02-17.txt.gz:{chan ch=tech}GabeLogan Tech: Is their a command in Mush to resize all the windows?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Negader Tech: aardreset.    see alos aard layout
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Negader Tech: oops i thnk its resetaard. not aardreset
T3/r7/2021-02-17.txt.gz:{chan ch=tech}GabeLogan Tech: that was it thanks
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Negader Tech: aard layout is a good command to know, to save your layouts
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: ... i've this weird lines on my ouput window... they are black and i got no idea .. what is causing them..  can anyone lead me and how to backup my mapper and stuff to just start with a new client..
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: what the lines are.. or what is causing them but i really don't want to deal with that haha .
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Veritheia Tech: you can just use the latest installer package and it will just update
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: playing on a portable version
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Veritheia Tech: That doesn't change anything
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: nice to know.. but i had to ask haha.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sivak Tech: is there a way to set the speed on crowley snd?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sivak Tech: like i seen people snd very fast and Im not
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sivak Tech: I have v5.5
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Torsin Tech: Not that I know of. What part do you think is slow?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sivak Tech: normal snd
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sivak Tech: search and destroy as hin ah dwarf
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Veritheia Tech: Can you be more specific?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sath Tech: maybe you're looking for the fasthunt wish?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sivak Tech: ya I bet thats it
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Torsin Tech: Fast hunting would be if you have huntmaster or a wish, I think.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: any techie around?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sath Tech: depends on what you're looking for
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: isn't love i'm ok with that..
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: but i'm having this weird thing and i can't quite understand what's causing it.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: on ticks and on movement/commands i get this help ouput written all the time..
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: already tried checking with trace disabling every plugin reinstalling the client.. and nopeeee
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sath Tech: what's the output?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: help
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sath Tech: it's on its own line?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sath Tech: just the word help?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: i found a workaround for it but isn't an actual fix and i just created  trigger so it gets ommitted but i really want to fix it.. like it should
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: yes just help on it's own line
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sath Tech: if a trigger works then it's coming from the mud. I've never seen the word help on its own line before, so I don't know what would cause that, other than a plugin running an echo command
T3/r7/2021-02-17.txt.gz:{chan ch=tech}A Calm Stormwind Tech: is it help or <help>?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: i'm running the client vanilla so i don't quite understand what could be causing it
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sivak Tech: you know that crowley s and d was lame it wouldnt move off the text window
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: just help
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sivak Tech: and it kept switching on noexp
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: seeing it on a clean client kinda creeped me out haha
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sath Tech: I guess someone's trapped in a MUD factory and asking you to save them?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Sath Tech: Lasher, we're coming for you buddy!
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: that must be it.. gonna omitted it then.. but welp
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: with trace on i can tell the last thing i get is a trigger matching named omit_gag
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Amakuni Tech: "end_gag_omit"
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Perryn Tech: I have an alias that is >* so I could >duff and it would pull it out of container and drink it. Is there a way to write that to wear it will also be able to eat a pill?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Big Boi Zyanya Tech: do you want it to always quaff & eat a pill? 
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Perryn Tech: I will want it to always either drink or eat whatever the text following > is.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}<<legion>> Slips Tech: any one use lastpassword?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}<<legion>> Slips Tech: girl locked her self out of her computrr
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Mannec Tech: the usual selling point of that kind of service is security...
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Mannec Tech: and the usual solution to computer passwords is a sticky note on the monitor, not an actually-secure password service :/
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Redryn Tech: sticky note can't be hacked online!
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Redryn Tech: most secure
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Tech: Mannec crosses his arms and nods slowly and sagely.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Redryn Tech: if you save it on your HD, it could be hacked
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Mannec Tech: is it, perchance, a windows machine?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}<<legion>> Slips Tech: she uses a master password. she prolly is. she is cautious about the app
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Mannec Tech: forgetting that master password would be bad - pretty good odds the service is specifically geared to be non-recoverable.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Mannec Tech: as far as just a windows password, thats only a minor hassle to fix.  probably.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Mannec Tech: burn a live linux recovery dvd, boot to it, and set user password to a new known value :p
T3/r7/2021-02-17.txt.gz:{chan ch=tech}<<legion>> Slips Tech: yea shes confused already. her keyboard broke and i told her to put it in the dishwasher
T3/r7/2021-02-17.txt.gz:{chan ch=tech}<<legion>> Slips Tech: led keyboard and the dog pounced on it
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Mannec Tech: if no detergent, then keyboard might be recoverable - pouncing, its anyone's guess.
T3/r7/2021-02-17.txt.gz:{chan ch=tech}<<legion>> Slips Tech: i was thinking it was the cord. or the usb slot wasnt working. a+ computer is a lie
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Mannec Tech: this is starting to sound like maybe there is more than a password issue at hand...
T3/r7/2021-02-17.txt.gz:{chan ch=tech}<<legion>> Slips Tech: yea get rid of the dog
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Tyranno Ruckus Tech: get the dog out of the dishwasher at the very least?
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Mannec Tech: and quit putting dogfood bowl on the cupholder...
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Borthain Tech: Is there an easy way to trace gmcp requests/responses? Trying to confirm if I'm receiving a response or not
T3/r7/2021-02-17.txt.gz:{chan ch=tech}Redryn Tech: if you're on mushclient, you can turn on gmcpdebug
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Tyranno Ruckus Tech: anyone have any constructive advice for mac folks on the new m1 stuff?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Tyranno Ruckus Tech: or should I just go stuff myself because I'm a mac person?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Gorsk Tech: i'd help if i could but i don't even understand the question
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Tyranno Ruckus Tech: sorry, the m1 architecture is now only available in airbook format
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Tyranno Ruckus Tech: does that mean it sucks and they are dirbbling it out little by little?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Gorsk Tech: this sounds like something fiendish might know about. try to catch him
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Tyranno Ruckus Tech: that sounds like a good tip
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Wraiven Tech: is there any way to force dinv to equip a dual wield build instead of shield?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Welwillend Welding Tech: I'm not sure, think so but I typically use the snapshot for my sets. have you tried them?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Wraiven Tech: i haven't, how do i do that?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sath Tech: you could maybe assign shields a negative value?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Wraiven Tech: oh how do i assign shields a negative value?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Shuli Tech: assign a greater weight to "offhanddam"
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sheriff Shindo Tech: dinv priority edit nameofpriority full   then change shield to -1
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sheriff Shindo Tech: and h(o|e)ld to -1 as well
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Wraiven Tech: ah i did that. shield was apparently already -1 to begin with. yet it's still equipping shield
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sheriff Shindo Tech: are you sure that is the priority you are currently actively using
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Wraiven Tech: yes
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sheriff Shindo Tech: did you do the whole long build process?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sheriff Shindo Tech: dinv analyze create priorityname
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Wraiven Tech: i did, it wasn't behaving like this in my previous tier
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sheriff Shindo Tech: then i am out of ideas
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Wraiven Tech: hmm, well thanks for answering anyway :)
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Wraiven Tech: oh, maybe it's because dinv doesn't realise i can dual wield... since i am r1 psi atm
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sheriff Shindo Tech: umm there is a priority setting for that... near the top
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Selitos Tech: i get a 'can't find mushclient/worlds/constants.lua' error when mushclient starts? 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: Did you add a new plugin and maybe not all the dependancies?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Selitos Tech: i got rid of the plugin i added but the error is still there...funny thing is constants.lua is in the lua folder?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: it wants it in the base worlds folder, copy it there as well
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sivak Tech: I get Directory .\worlds\Aardwolf\ does not exist
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Selitos Tech: yeah but i don't know what wants it there...
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Sivak Tech: on the spellups plugin
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Limunious Tech: is there a command to make a sound trigger to myself?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: hello, anyone here using mudlet?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Talbor Tech: I used it before I started Aard & switched to Mush because it's a lot better for Aard. What are you needing help with?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Talbor Tech: there are a few who do use it though
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: I'm trying to call a self defined function from a trigger, it doesn't work, it just doesn't do anything. I know the trigger is OK, because if I execute code directly inside trigger it works
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: do I need to register the function or something?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Talbor Tech: I don't know much about thatm but you cab try again later when more people are on or you could ask on the Mudlet Discord help group. They're usually very helpful. I asked for help on there a few times when I was using Mudlet,
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Talbor Tech: iirc there's a button on the toolbar for the dicsord channel
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: unfortunately discord doesn't work for me here. Thanks anyway, I'll keep trying
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Amakuni Tech: even the browser version?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: yep even the browser version :(
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: iirc it tries to setup a connection and fails
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Talbor Tech: Firewall blocking it?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: I don't have any firewall running
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: hmm, if i define the define inside the trigger itself, it works, but that defeats the object of the exercise. But it's something to go on.
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: define the function
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: it was a stupid mistake -- I was missing a space!
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Amakuni Tech: hah
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: not a networking guy, not a security guy, but: I have 3 files that I cannot copy to/from any shared folders on my network. there was no issue with these files previously and they haven't changed. even if I change the file extension or file name, same issue: I get an error saying, "There is a problem accessing (folder), Make sure you are connected to the network and try again."
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: files aren't corrupt, not a permissions issue
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: check folder permissions - whether you have "sharing" permissions and whether you have file permissions (if it is Windows system then those are 2 separate things)
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: also make sure you have offline folders turned off (in synchronization center IIRC)
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: permissions are fine, no offline folders
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: I can open/create/modify files in the folder, and these three files are causing problems on all shared folders on multiple servers while logged in with admin permissions
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: could be also some AV software blocking files by pattern
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: AV is my only idea
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: they are .bpl files (like dlls) but other bpl files for the same software are working
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: use also "handle" to check whether those files are not used by some app, IIRC there are some flags that allows you setting exclusive access to file - so when some apps uses it you cannot access it 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: if you're usign windows, process explorer is really useful to see if files are in use locally and with what is using them 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: oplocks: https://infusionsoftware.zendesk.com/hc/en-us/articles/115002293593-To-Disable-SMB2-and-OPLOCK-Network-Locking-Errors-
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: it is possible that file is used locally (then handle / process explorer) or by remote client (Computer Management (Local) -> System Tools -> Shared Folders -> Shares)
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: I assumed it was Win based system, if it was Linux - then you need also check ACLs and selinux
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: don't worry,  NTFS uses ACLs too :P 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: also sometimes Windows has problems with special characters / special encodings
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: it's Windows, but these files/this process hasn't changed in almost 10 years
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: I'm too dumb to know what most of this stuff is, but I can confirm that the files aren't in use when I'm trying to copy them
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: you could probably also use Wireshark to diagnose SMB/CIFS related problems, sometimes you may be able to see error messages that are not displayed by client software
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: Can you try copying in powershell or cmd and try both in admin session and non-admin session and see if it's consistent? Maybe nothing changed on your end in last 10 years, but Windows has changed in the last 10 years especially IRT to "admin token" UAC stuff. 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: are both stations directly connected to switches? (problem when connected via phone switch: https://community.spiceworks.com/topic/1433090-copying-files-to-network-share-using-windows-explorer-almost-always-fails)
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: tried in command prompt. first created a test.txt file in the folder on the server to make sure that worked, copied fine. then tried one of my problem files, "The specified network name is no longer available."
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: command was: copy \\server\folder\test.txt C: (worked fine, no issues) then copy \\server\folder\problem.bpl C: (no longer available)
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: what about copy \\server\share\folder\problem.bpl \\server\share\folder\problem_maybethistimeitworks.bpl
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: same error with the problem bpl file, worked fine on the .txt file in the same folder
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: like somethings getting inbetween me and the server when my machine tries to read the file
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: I have a local version of the same files that are identical and I can't copy them to that server or other servers too
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: is that the actual filename? if not, try renaming it to something really simple, like test.bpl?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: he already tried that
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: not the actual name, but I've tried renaming the file or changing the extension
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: could be also network eq problem, some devices have problems with files of exact size
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: in powershell, can you do $a = get-acl \\server\share\folder\problem.bpl ; $b = get-acl \\server\share\folder\test.txt ; $a|ft -auto;$b|ft -auto;compare-object $a $b 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: like you cannot transfer file with size 64000 bytes, but can transfer any other file :P
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: ah hm yea also maybe check your AV software or something, just read your c omment about trying to copy the file  from local. 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: AV sofwtare or windows bitkeeper or whatever their signed binary mmgmt thing is called 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: with the powershell command, both files show identical permissions
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: I'll harass the actual IT people about antivirus
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: also try to robocopy it, "robocopy \\server\share\folder c:\localfolder" 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: yea, IT people love to be harassed about AV, it will make their day. you should def wait until like 10 minutes before EOD as well. 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: source directory name invalid
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Lasher Tech: we had a ticket escalated to development where someone had been working in their browser and the browser crashed demanding that we "find a way to recover it" because "it is going to be bad if you cant".
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Kagaku Tech: maybe try mapping the network location to a drive letter?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: wait I'm screwing something up with the robocopy command
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Lasher Tech: fuck off bro, you can get god to call if you like, we still dont have the data.
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: sir this is a nocurse channel
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Welwillend Welding Tech: language!
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Lasher Tech: it temporarily wasn't, and now it is again.
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: fair
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Welwillend Welding Tech: oh, thank you
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Lasher Tech: lol, no thanks for the reminder.
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: I like getting tickets asking when MS will change something that a client doesn't like
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: and technically it's an IT issue, but it's messing with the software I'm in charge of, so they kick all that stuff to me anyway
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Trachx Tech: you could also upload one of those bpl files to virustotal.com - if it is detected by some engines then most likely AV is problem
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: if he can't copy the file locally he shouldn't be able to upload it either, but hey, maybe Raded is really going to endear himself to his IT team if he accidentally finds a gap with the AV protection lol
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: I have a local copy of the file anyway. no issues on virustotal
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: I fixed the user's issue earlier by e-mailing them the 3 files that wouldn't copy from the server so there's the AV gap
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Tech: Ogreskull sighs.
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Radric Tech: asher, lately I have been using Redux pattern with a undo/redo chain saved in indexedDB for that very reason.  People work on stuff and browsers crash...
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Radric Tech: Lasher even
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: well I e-mailed them one of the problem files, time for lunch
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: my workaround solution to my problem from earlier: put all the files getting kicked out by the AV (probably) into a 7zip file with encrypted file names, move that to the client machine, extract in destination folder.
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: virustotal shows all undetecteds for these, but community score pops up on the not good side for one of them
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Antifa Raded Tech: anyway our AV software sucks if I can trick it
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Tech: it might be a "file screen" rather than an AV flag
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Tech: I've set up file screens where if a file has a name pattern of one of the usual ransomware files, it would turn off all fileshares and email me
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: I mean it  note
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Ogreskull Tech: mis
T3/r7/2021-02-18.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: i want everyone one of you eggheads into ercot. this is ridiculously crazy
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Amakuni Tech: guys got a question how do i extend the lines written to ouput ? which option 
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Cedrick Tech: pagsize
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Cedrick Tech: sorry pagesize
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Amakuni Tech: i meant other stuff but thanks i already found the option
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Perryn Tech: is there a tutorial that you would recommend that teaches a little about writing scripts?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Useful Hadar Tech: i dont think there is a specific guide, but looking at other scripts, and asking is how a lot of people learn
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Tech: Gildar is agreeing with that Useful Hadar person again...
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Veritheia Tech: You can start with simple aliases and triggers. Anything fancier, someone has probably already made a plugin.
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Gildar Tech: It depends on what your attempting to script and what IT uses then adapting
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Veritheia Tech: But if someone hasn't then something similar probably exists
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Veritheia Tech: Otherwise, there are lots of resources on the internet about programming in lua
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Perryn Tech: yeah, I'm think specifically about alias purposes and just educational. I'm using mushclient. So just try to pick apart a script in a plugin?
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Veritheia Tech: aliases are dead easy - check the mushclient documentation
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Perryn Tech: I have aliases down. But, for example, I'd like to find a way to turn my alias that grabs a potion out of a bag and drinks it into something that could also decide to eat it if it is a pill.
T3/r7/2021-02-18.txt.gz:{chan ch=tech}Mannec Tech: easy answer is to just have it do both.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}<<legion>> Slips Tech: any phone gurus
T3/r7/2021-02-19.txt.gz:{chan ch=tech}<<legion>> Slips Tech: how would one connect to aard on a phone with out downloading a program. they removed flash so he cant play
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Dhalsim Tech: Does anyone know if it is possible to get help info more directly? I would like to get just (eg)
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Dhalsim Tech: Help Keywords: 'Cobra Bane' and Syntax: cobra
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Nohh Tech: i don't believe so
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Giddorah Tech: Hmmm... I'm making a mobdeaths reformatter... But... I'd like to not show the output of mobdeaths. How can I hide everything that happens between two triggers?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Nohh Tech: omit from output = y
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Nohh Tech: <trigger ...  omit_from_output="y"></trigger>
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Giddorah Tech: Ah, gotcha
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Giddorah Tech: How do I gag all output from the mud?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Giddorah Tech: In lua
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Areia Tech: quit
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Tech: Areia looks around and whistles innocently.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Dixon Tech: alt+f4
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Dixon Tech: bah
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Giddorah Tech: Baha :P
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Tech: Areia snickers with Dixon about their shared secret.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Areia Tech: Could make a trigger with a match of ^.*$ and check omit from output.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Giddorah Tech: Hmm, true
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Useful Hadar Tech: that winky face on a cell phone is a good one
T3/r7/2021-02-19.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: is there something like akin to a practice everything trigger?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Radric Tech: that would be nice.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: i hate typing all that nonsense to begin with... and now with 1 hand being bandaged its even more agravating -_-
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Radric Tech: like a 'practice full all'
T3/r7/2021-02-19.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: yep >_> that would have been great
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Talbor Tech: anyone know how to disable hide with Pwars Spellup plugin?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Talbor Tech: don't see a spell number and tried noauto hide
T3/r7/2021-02-19.txt.gz:{chan ch=tech}DangerMagoo Tech: show hide
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Talbor Tech: Great, thank you! Didn't think of trying that
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Crazy Lady Igamu Tech: does nanyone know how to enlarge text in termius?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Eternally Darkened Tech: Can area information be retrieved using GMCP? I see it listed on the Aard Clients/GMCP wiki page as request area, which I assume would be gmcp("area"), but have had no luck getting any information.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Teacup Tech: Darkened, Read it a bit more closely. What you're looking at is not a module to retrieve data from, it's you sending a command to inform the server "bro i want this data now"
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Teacup Tech: The command would be "request area", not just "area"
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Kagaku Tech: I just tried it with mudlet using lua sendGMCP("request area") and it works
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Eternally Darkened Tech: I've tried gmcp(request area) and gmcp("request area") in MUSHclient and I don't get anything.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Eternally Darkened Tech: I don't get an error, either, though
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Kagaku Tech: in mudlet i need to enable debug to see gmcp messages (not the actual messages but info that things are being sent/received)
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Eternally Darkened Tech: Well, without quotes I do get an error: [string "Command line"]:1: ')' expected near 'area'
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Veritheia Tech: in mushclient, just "sendgmcp request area"
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Teacup Tech: Darkened: \\\Note(CallPlugin("3e7dedbe37e44942dd46d264", "gmcpdata_as_string", "request area"))
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Veritheia Tech: make sure gmcpdebug 1 or 2
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Teacup Tech: Darkened: The command tion itself won't return anything; If you want the data you'll need to use the gmcp modules
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Teacup Tech: Anyone know if there are any plugins that have search and destroy as a dependency and use its functions? 
T3/r7/2021-02-19.txt.gz:{chan ch=tech}[Outlaw] Mendaloth Tech: Yes, I'd put good money on a plugin out there like that.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Teacup Tech: I see so much unused code in S&D
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Teacup Tech: which is why i'm wondering
T3/r7/2021-02-19.txt.gz:{chan ch=tech}PenguinGod Galoth Tech: it was functions in older versions that doesn't work now or has been disabled for various reasons
T3/r7/2021-02-19.txt.gz:{chan ch=tech}(Aleister) Crowley Tech: I still have to do a bit of cleanup. I've also made some changes that have made some code obsolete, but I keep in there for other reasons. Eventually, it'll be cleaned up, too.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Negader Tech: when i copy and paste my triggers from mushclient to a text editor, tabs come out as '&#9;'   Is there a way around this?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Mannec Tech: just do a search/replace in the text editor :p
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Veritheia Tech: step 1, notepad++
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Negader Tech: i am using notepad++, and also tested on other text editors.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Veritheia Tech: step two, what mannec said
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Veritheia Tech: alternatively you can copy/paste them out of your mcl file
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Negader Tech: so, does it do the same with you?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Negader Tech: or is it just me?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Gildar Tech: Most editors will pull what your putting into it, well, into it. Your source data is the prob it sounds like?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Gildar Tech: smells like the extra color/coding might be tripping ya up, perhaps?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Veritheia Tech: no
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Veritheia Tech: that's just code for tab
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Perryn Tech: I'm using pwar's snd and I just installed dinv. I've noticed that since installing dinv my noexp sometimes gets toggled off. Is this a common problem?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Nohh Tech: i can't imagine why dinv would ever do anything with your noexp setting
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Perryn Tech: me either. haha -but it's toggling off and that is the only thing I have changed.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Nohh Tech: and by toggling off you mean it's enabling experience gain?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Perryn Tech: that's correct.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Graciella Tech: I think pwar's plugin does that to prevent leveling during a campaign
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Perryn Tech: yeah, I have it set to turn on if I haven't finished a cp, but now it is turning off (to where I'll get exp) every now and then.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Jowlem Tech: no idea.  shouldnt have anything to do with dinv tho. 
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Nohh Tech: maybe double check your enabled plugins
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Perryn Tech: thoughts about what I should look for?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Nohh Tech: 2 versions of S&D
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Radric Tech: is there a command to use the configured mapper bounceportal manually?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Radric Tech: like "bounce" and then the client issues the commands you configured?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Nohh Tech: just make a bounce alias that does it? or do you change your bounceportal that often?
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Radric Tech: nah i don't change it, I just thought it would be convenient
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Radric Tech: since the mapper can use it, i figured I might be able to.
T3/r7/2021-02-19.txt.gz:{chan ch=tech}Nohh Tech: you could write an alias that calls mapper bounceportal and a trigger to parse the bounceportal command and execute it, i personally just use aliases with mapper goto commands and let mapper worry about which portals to take, maybe i'm misunderstanding why you specifically want to use the selected bounceportal
T3/r7/2021-02-19.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: ive gotta figure out how to pry open this NUC to extract data from the HDD. Ive got hundreds of original songs on it. sigh why does everything half to be so challenging :)
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Merist Tech: how can i make a trigger that tests against output in the chat miniwindow?
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Pepelac Tech: i'm running the mush client in wine... how do I set up keyboard shortcuts in this thing? I have no keypad on my macbook and would like to use alt+arrows for movement, but can't seem to find where to configure that... would you point me in the right direction, please?
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Knitted by Kharpern Tech: you might look at the macro parts in commands
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Pepelac Tech: already did, but that only allows editing of exiting set, which is quite limited
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Trachx Tech: you can use Accelerator function like Accelerator("Alt+Up", "n")    (to get name of accelerator choose Input --> Key name and press combo you want to use)
T3/r7/2021-02-20.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: MUSHclient questions answered here
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Ogreskull Tech: yes can u tell me your plan for leveraging API blockchain machine learning to sell more units of software
T3/r7/2021-02-20.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: I give this away for free
T3/r7/2021-02-20.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: also the blockchain is a scam
T3/r7/2021-02-20.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: https://imgur.com/3sk4A4C
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Jowlem Tech: anyone know of an easy way for the consider all window plugin to show the difference in good/evil aligned mobs?
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Feihu Tech: mobdeath evil/good
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Nohh Tech: you'd have to modify the script to parse the auras and also to print out the red/gold auras in the output window
T3/r7/2021-02-20.txt.gz:{chan ch=tech}Jowlem Tech: hmm ok. dunno how to do all that.  thx tho
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Negader Tech: if you type 'colors' on mushclient command line, do you get list of colors?.  if so, how do i use the following numbers.  like lightpink that's on the bottom of the list, what # do i need to use on gt to get that color?
T3/r7/2021-02-21.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: no
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Sheriff Shindo Tech: type color 256 then from that list @x123
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Negader Tech: oh ok that's a good one.
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Sheriff Shindo Tech: oh wait ... never mind... colorset gt @123 would give you light blue but use the same method for any colour you like on the lists 
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Negader Tech: i had 'colors' aliased as '\\\\\\world.Debug "colours"'   i should change that to color 256 since that seems more useful
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Sheriff Shindo Tech: if your alias is catching colorset you have a badly delimited alias
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Teacup Tech: Just wondering, when was the last time the MUSHClient aard gmcp mapper plugin was updated?
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Borthain Tech: https://github.com/fiendish/aardwolfclientpackage/commits/MUSHclient/MUSHclient/worlds/plugins/aard_GMCP_mapper.xml
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Borthain Tech: 23 days ago. :)
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Teacup Tech: Borthain: Thanks!
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Varkiann Tech: Im looking for a MUD client that will run on Mac OS 10.7.5.
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Varkiann Tech: I tried an older version of Mudlet but it wont install. All sorts of errors.
T3/r7/2021-02-21.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: 10.7.5 is going to be hard...hmm
T3/r7/2021-02-21.txt.gz:{chan ch=tech}[Battle] Scars Tech: does mapper use tier adjusted level? or should i be adjusting the level for tier?
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Varkiann Tech: Mudlet - what do I type into a Timer to make it send a carriage return (for anti-idle)?
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Talbor Tech: Should be able to make a trigger to "look" when "your eyes glaze over"
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Varkiann Tech: Ah, clever, thanks.
T3/r7/2021-02-21.txt.gz:{chan ch=tech}Talbor Tech: Np
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Dhalsim Tech: Is the gmcp info on the wiki #sh name=Dhalsim|class=Thief|subclass=Bandit|race=Quickling|clan=tao|pretitle|perlevel=6000|tier=4|remorts=5|redos=0|classes=21630|level=36|pups=0|totpups=118
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: http://www.aardwolf.com/wiki/index.php/Clients/GMCP
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: everything's their, afaik.
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Dhalsim Tech: Anyone know what gmcp.comm.quest.timer and ...quest.time are?  I started a daily and have done nothing yet. I check the quests status and those two numbers have not changed. Prompt qt, of course, is ticking down.
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Dhalsim Tech: Thanks, Xyzzy. I was hoping for a way to get comm.campaign/global info without trig_capturing patterns
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Dhalsim Tech: I just saw my wiki post. It was supposed to read, "is it up to date"?
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: yeah, I think it's up to date... don't think it sends much in the way of campaign or gq info... not much on mobs in general
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: all that stuff is triggers/pattern matchin
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Dhalsim Tech: ...and you know anything on the quest timers?
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: quest time is sent as part of the group info
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Tech: it's just the amount of time you have for the quest. It's only updated when something happens or you request it, so it's not counting down
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Dhalsim Tech: Ah. I see.  Am not that au fait with gmcp-ing. I am using cMud and development on that ceased a decade ago...although the price is still very 2021.
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Rosz Tech: Hi. is there some code readable output to identify a item ?
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Rosz Tech: I need the weight of an item
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Trachx Tech: tags? invdetail
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Rosz Tech: yeah thank you. that what I need
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Torsin Tech: Crowley: I'm getting errors on S&D 5.5 (just updated): Trigger function "cp_mob_killed" not found or had a previous error.
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Torsin Tech: Is there a command I have to do to create the database?
T3/r7/2021-02-22.txt.gz:{chan ch=tech}Torsin Tech: I found the command, but I'm still getting the Trigger function "cp_mob_killed" not found or had a previous error. error.
T3/r7/2021-02-23.txt.gz:{chan ch=tech}<<legion>> Slips Tech: 8 belokg to a grouo that wants to buh a new tv with the works. any recommendation?
T3/r7/2021-02-23.txt.gz:{chan ch=tech}Illivex Tech: define "the works" does it need displayport?
T3/r7/2021-02-23.txt.gz:{chan ch=tech}<<legion>> Slips Tech: zoom cant be with wifi i found out. they want live streamimg and netflix. itsa business network so i qill have to work with techs to get it rigbt
T3/r7/2021-02-23.txt.gz:{chan ch=tech}<<legion>> Slips Tech: i looked up tv with camera and lokms like im goign to need a phone or la0top
T3/r7/2021-02-23.txt.gz:{chan ch=tech}CheeZy Bot HiSaZuL Tech: can it make sandwiches?
T3/r7/2021-02-23.txt.gz:{chan ch=tech}<<legion>> Slips Tech: they want it to cook tha ksgiving too
T3/r7/2021-02-23.txt.gz:{chan ch=tech}<<legion>> Slips Tech: is it possible to buy just a camera for a tv?
T3/r7/2021-02-23.txt.gz:{chan ch=tech}<<legion>> Slips Tech: i wanna go with the nano 120 hz 65 " tv with 
T3/r7/2021-02-23.txt.gz:{chan ch=tech}<<legion>> Slips Tech: LG thinQ AL and web os
T3/r7/2021-02-23.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: Running musclient, I seem to have the map miniwindow, anyone want to point me how to get that back
T3/r7/2021-02-23.txt.gz:{chan ch=tech}FrshPrncOf Kelaire Tech: Well nevermind.  I clicked where it should be and magically it appeared...that's new
T3/r7/2021-02-23.txt.gz:{chan ch=tech}Amakuni Tech: hey guys how do i setup world specific plugins?
T3/r7/2021-02-24.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: why does my phones apps (as I try to clear out storage space) show literally 3-5 instances of the same app? I have no qualms about calling out corporate idiocracy. Its a Samsung A11 running off Tmobile
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Pliagha Tech: is anyone using termighty? 
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Tech: the insecticide? heh, I googled it thinking that it was some terminal emulator/telnet/ssh app I hadn't previously heard of
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Pliagha Tech: it's a set of scripts for tintin++ :)
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Tech: hmm, never heard of it (I'm a tinyfugue guy myself), it's not on the first page of a google search of the term
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Pliagha Tech: it's linked on the wiki
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Tech: ahh, that's the thing with wikis, anyone can put stuff onto them :-)
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Pliagha Tech: oh yeah, I don't expect any help
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Tech: I knew Ixle has an Aard setup of tintin++, and remember someone else making something similar, but hadn't heard of Fierre's before now
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Pliagha Tech: just wanted to see if anyone else /did use it
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Tech: heh, in all of 2020 and 2021, I've only seen it even mentioned on the tech channel twice
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Pliagha Tech: I figured out my problem -- I had to turn on the MAP, MAPEXITS and MAPNAMES tags
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Pliagha Tech: my map seems to work OK now
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Tech: you can always ask the actual question you have, I probably could've fixed it for you without knowing anything about your client...
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Daeroq Tech: Can the rooms.gaardian.com take the query string as a URL parameter? e.g. http://rooms.gaardian.com/index.php?query=string ?
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Rosz Tech: maybe you will want to try with POST request
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Daeroq Tech: yeah, or of course I could inject some JS to populate the input field with the string, but, well, this would be the easiest approach :D
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Antifa Raded Tech: the internet is telling me that Spiceworks has no way to mass close open tickets, just mass delete, which I dont wanna do
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Antifa Raded Tech: can anyone tell me that the internet is wrong and there is a way to do this
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Szzilleriel Tech: pretty sure spiceworks requires at least a 1 character comment on the ticket to close it lol even just a space works
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Antifa Raded Tech: I responded to the tickets over e-mail, so they're assigned to me and there's text in them, and I can log in to the website and click close
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Antifa Raded Tech: but I have 23 pages of open tickets
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Antifa Raded Tech: maybe I'll make our helpdesk tech do it for me
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Trachx Tech: googled: v1 allowed to bulk close them https://community.spiceworks.com/topic/2037788-bulk-closing-of-multiple-tickets-in-spiceworks-7-5
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Trachx Tech: other option is to use some tool to access database and just use sql query to close them
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Szzilleriel Tech: if you got an internet facing VMWare vCenter server better go patch it quick. Unauthenticated RCE with a simple get request.
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: mushclient questions answered 
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Jowlem Tech: sometimes when i close muchclient it says world varibles or something has changed do i want to save them.  i assume i should just say yes?   it seems to be random and i dont make any changes that i know of. 
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: say yes unless you want to say no
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: you can tell mushclient to not ask though if you want
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: File->Global Preferences->Closing
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Jowlem Tech: ok
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: uncheck offer to save world if only variables have changed
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Areia Tech: Looking for the easiest way to check whether the client being used is the no-visuals version. I found one function in aard_lua_extras that looked usable but it doesn't seem to return what I expect.
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: uhh...let me think
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: require "aard_requirements" and then if aard_req_novisuals_mode is not nil it is the no-visuals version
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: I'm sure I could do that better
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: want me to add something?
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Areia Tech: Ooh, nope, that works just fine! Thanks :)
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: well let me know if you do
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Veritheia Tech: Hey Fiendish - I have a script that captures mud output and prints it to a miniwin using your plugin. I also use win:add_text() to add some text. But when I run the script, everything prints fine except the final line (using add_test) which doesn't print at all until I click the window. Then it magically pops up. Does that sound familiar or is it too vague without seeing the script?
T3/r7/2021-02-24.txt.gz:{chan ch=tech}Merist Tech: Is it possible to have a trigger match against text in the chat miniwindow? I'm trying to ColourNote into the main window when the word 'spellup' is mentioned, but can't get the trigger to fire
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: Veritheia: show me 
T3/r7/2021-02-24.txt.gz:{chan ch=tech}IAC DO Fiendish Tech: Merist: triggers can only fire on text that goes to the main output. If the messages aren't going to the main output then you have to use GMCP channel messages 
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Dhalsim Tech: Has gmcp chnaged? I can no longer see quest info (gmcp.comm.quest)
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Nohh Tech: it's just comm.quest
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Dhalsim Tech: cmud. Was working fine 2 quests ago
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Kagaku Tech: it was working here up to 20 ticks ago (at the time of my last quest)
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Nohh Tech: unless you turned it off somehow, which is unlikely but you can check with the 'protocols' command
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Nohh Tech: and 'protocols gmcp' for more specific gmcp stuff
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Dhalsim Tech: Well I am in the dark. GMCP is (still) enabled in cmud and is ON here...but #SHOW  shows nothing and most other gmcp calls now just contain odd output that was not there before.
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Nohh Tech: restart your client?
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Dhalsim Tech: Restarted PC
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Nohh Tech: what kind of odd output
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Dhalsim Tech: well comm.quest (for cmud action=status|status="ready) showed me targ=<mob>"|room=<room>|area=<area>|totqp= ... etc
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Dhalsim Tech: now all I see is action=status|status=ready
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Nohh Tech: well, never used cmud so none of that means anything to me i'm afraid.. but it's definitely not a mud problem
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Kagaku Tech: action=status|status=ready means that you are able to quest, so are you able to quest?
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Dhalsim Tech: being able to quest is not the issue.
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Kagaku Tech: comm.quest shows different things depending on your quest status. what does it show now and what did you expect it to show?
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Dhalsim Tech: Never mind. I think you are missing the point.  It has nothing to do with status...it is about the entire output.  Thanks anyway. I'll figure it out.
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Kagaku Tech: the entire output (or contents) of comm.quest changes depending on your quest state, look at http://www.aardwolf.com/wiki/index.php/Clients/GMCP for details
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Ogreskull Tech: Anyone use Salesforce Lightning's Support Console and know of a way to force links to cases to open in an existing session window and not in a new tab/window? From Slack and Gmail primarily
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Once Tech: question... i had to redownload the mud client i cant log in ideas?
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Szzilleriel Tech: you have a password saved before it and say wrong password? or how's it failing to login
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Once Tech: different port mebie?
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Once Tech: it wont even load
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Szzilleriel Tech: when I installed the mushclient the other day it was broken. I had to manually edit a file to the right path to get the client to work. Being new I had no clue who to report it to
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Szzilleriel Tech: was getting a popup error about it not being able to find plugins in system32.
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Once Tech: ah  ill try manual
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Szzilleriel Tech: did it install to your desktop?
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Once Tech: aye
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Szzilleriel Tech: if so to get it to work you'll need to manually right click mush client and run as admin to get it to load plugins
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Szzilleriel Tech: it should be installing to C:\Users\Public\Public Games\ instead of people's desktops
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Szzilleriel Tech: directory bypasses some of the more locked down UAC checks
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Szzilleriel Tech: if you move it there you won't have to run as admin
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Szzilleriel Tech: third solution is to open the main aard file and change .\plugins\ to a full path directory
T3/r7/2021-02-25.txt.gz:{chan ch=tech}Once Tech: hmmm whats he other port?  i think that worked also last time it should be ok there is no constraints
T3/r7/2021-02-25.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: is there a plugin for voice dictation? i finally plugged in my mic to the laptop
T3/r7/2021-02-26.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: i still dont know how to use plugins, but is there a package that would help me track the auction data? or how could i do it within mush 
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Szzilleriel Tech: you using the mushclient installer with the aardwolf plugins?
T3/r7/2021-02-26.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: yes, and they all appear enabled im just a dunce :)
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Summoner Yuna Tech: How do you install fonts on Windows 10? I did it like I did on previous versions of Windows: By going into windows/fonts/ and dragging and dropping the fonts in there. Windows says they were installed by no programs can find the new fonts.
T3/r7/2021-02-26.txt.gz:{chan ch=tech}SNEAKER Mushambo Tech: is there a plugin suite where I could use my mic to dictate? i finally got it hooked up to the spare computer :)
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Dhalsim Tech: Probably the best method would be to right click the font and select 'install'
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Agnot Tech: Is there a way to put a short pause in an alias in mushclient?
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Agnot Tech: I'm using an alias to Vidblain and want to wait before I go to the next alias to Imperial Nation - only about 5 seconds.
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Agnot Tech: using mapper goto and execute as the send to
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Torsin Tech: DoAfter or DoAfterSpecial?
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Torsin Tech: sending to script or execute?
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Agnot Tech: execute
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Agnot Tech: so the doafter didn't work, but I'm not good at this.
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Torsin Tech: DoAfterSpecial(5, "alias", sendto.execute)
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Agnot Tech: Thanks, I'll try that!
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Nohh Tech: you could go stand in the room with the portal to vidblain and make a custom exit to enter the portal then mapper goto <imperial start room>
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Agnot Tech: I think the problem with Vidblain for me is the landing room is random, therefore I need the pause
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Nohh Tech: it's random but the cexit of enter portal;;mapper goto #####  will calculate the path from whatever room you land in
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Agnot Tech: You lost me there
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Torsin Tech: I'd listen to Nohh, he knows much more than I.
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Dhalsim Tech: anyone know why the skill # doesn't appear in 'allspells'?
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Areia Tech: It does.
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Dhalsim Tech: I try 'allspells' and 'allspells all' and SKILL number is not there.
T3/r7/2021-02-26.txt.gz:{chan ch=tech}WordWarrior Tech: the middle column labelled Sn is the spell number
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Dhalsim Tech: Yes. Of course it is.  However, for SKILL SKILL SKILL (NOT SPELL) there is only '-'
T3/r7/2021-02-26.txt.gz:{chan ch=tech}WordWarrior Tech: because skills don?t have a number
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Veritheia Tech: I'm guessing it's due to a difference between skills and spells on the back end
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Dhalsim Tech: Apparently they do. When you see the skill affoff/affon tag it shows a # for the skill
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Areia Tech: Skills do actually have an SN. Not sure why it doesn't show.
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Areia Tech: e.g., show assault
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Negader Tech: if you're looking for spell/skill number, you could type 'slist', or see 'help slist' 
T3/r7/2021-02-26.txt.gz:{chan ch=tech}WordWarrior Tech: ah interesting, i did not know that
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Dhalsim Tech: thanks for that. I rarely use slist as it doesn't have the level
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Kerith Tech: mapper Q: soo how do you remove a exit when a room is "moved"/deleted? :)
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Guinness Tech: you can just right click on the map
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Guinness Tech: and then choose an option for the room you right click on
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Kerith Tech: awesome thanks
T3/r7/2021-02-26.txt.gz:{chan ch=tech}[Battle] Scars Tech: anyone else have trouble with Norton killing the new aardclient?
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Ayasinda Tech: lol for a moment I though you meant the player Norton
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Torsin Tech: ha! Yeah, mad hacking skills has Norton!
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Call me Boyboy Tech: anyone using dinv? Any idea how to stop it from putting stuff I collect along the way into a specific bag? I want the stuff in my inv instead.
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Call me Boyboy Tech: mine is always putting stuff into the aarchaeology collection satchel automatically.
T3/r7/2021-02-26.txt.gz:{chan ch=tech}Call me Boyboy Tech: keys that I collect is automatically put in there and it hinders me from opening doors
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Radric Tech: anyone ever have DINV store the wrong level for an item?  I identify it and its level 112, but dinv search shows it with level 110
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Faithful Ruhamah Tech: I built a new website for Amazon clan, the skeleton/framework uses Airtable as a backend so others within the clan can edit the content easily. http://amazon.clan.l33t.xyz
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Faithful Ruhamah Tech: looking for a few folks who might be interested in setting up clan websites
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: ok, I am starting pentesting that site
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Kanmuru Kirua Tech: lol
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Logrom Tech: Lol, T9R7 + 1M quest points + 500 GQ wins + 10k campaigns..  the dummy minimum requirements for joining are so easy!  :P
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Daeroq Tech: almost there.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: guess I'm out!
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Faithful Ruhamah Tech: lol i don't know what the actual requirements are, just setting it reasonably high and let my other leaders fill in the actual requirements lol
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Faithful Ruhamah Tech: it's just a placeholder for now hah
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: how do I become good enough for you?  I only have 975k qp earnt and 4500 cps :/
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Nohh Tech: 1M QP is a bit much, rest is fine.. gotta keep out the riff-raff
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Logrom Tech: Lol
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Nohh Tech: less qsitting more cprunning imo
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: I'm t9r7 sh, that's not really qsitting :P
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: or you could join imperium and deal with my sarcasm on a quasi-private channel
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Daeroq Tech: sarcasm mandatory
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: I understand that this may not appeal ;)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: but we have a lot of good closed gear and online resources
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Daeroq Tech: I'm confused on how many levels of sarcasm we are now. I really think sarcasm is mandatory.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Nohh Tech: not sure if he's actually trying to recruit me or just being sarcastic
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: while I am on my quasi-recruitment spiel, what we mostly seek are mature players with a healthy game-life balance heh
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: who me?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: both! :P
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Nohh Tech: how will i ever be able to trust again
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: I am not a clan leader here..just looking for some recruits
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Daeroq Tech: my work-life balance is bonkers, I guess that counts towards a healthy game-life balance.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: I was awol for ten years while busy, and we've dropped a lot of active member volume heh
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: but if you want to join a clan trying to rebuild which actually exists...consider imperium :)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Daeroq Tech: dammit, 1 target left on CP, but wife tells me I gotta fix kids' bikes. and by fixing, I will transport the bikes to a professional to fix. I will leave you gentlepeople to it. laters.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}[Battle] Scars Tech: c pacify wife
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Iron Duck Chuft Tech: scars can tell you how great imperium is ;)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Perryn Tech: question about dinv... is there a way to make it tell me what shield it would recommend - it is recommending dual wield when I do set display
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Veritheia Tech: you need to make a priority set that prioritizes shields
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Durel Tech: You can tell dinv to disable the second (offhand) wearable slot so it will pick a shield.  In your priority, add a line like:  ~second 1   (or ~second 1 1 1 1 if you have multiple level ranges in your priority).  See "dinv priority display psi-defense" for an example :)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Perryn Tech: thank you!
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Rosz Tech: hi how to know I am having noexp status ? is it available somewhere like GMCP ?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Veritheia Tech: should display on your prompt
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: it tells you after every kill and is in your prompt
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Negader Tech: can turn off noexp showing up on prompt. i had accidentally turned it off before. don't recall the command.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Rosz Tech: yeah. so I need to use script to read my prompt manually ... Thanks
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: use: gmcpdebug 2 to check what you can get from GMCP
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Areia Tech: It's also available via GMCP.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Areia Tech: gmcp("config noexp") IIRC. Or similar. It's in the documentation.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Veritheia Tech: You can spot check just with toggling noexp if you don't need to constantly be informed
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Rosz Tech: yeah thanks, that what I need, I will recheck document
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: anyone on that can answer an easy hardware question?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Dixon Tech: how easy
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: ask and find out?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: nod
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: you need use special USB to debug your CPU - if it is at least 6th gen then USB serves as JTAG
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: I bought ram for my son's desktop
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: wrong voltage
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: 2 4GBs
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Tech: Yes, THAT Xyzzy THWAPS Trachx for being a moron.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: I think I installed them right, but on the system it still shows the original 8 gb, instead of 16
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: chipset limitations ?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Dixon Tech: check mobo if compatible
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Dixon Tech: should be simple enough to find a list online
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: oh, so maybe it's not the right ones for his PC?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: you have 4 slots populated and the new or old ones arent showing?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: no
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Robbo Tech: The memory manufacturers typically have lookups that you punch in your mobo or PC model and it tells you the maximum and all the specs. Crucial has a nice one.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: figure out which slots arent showing up
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Ayasinda Tech: 27 Feb 19:29:43] Piffaron Tech: 2 4GBs    That is 8 and not 16 
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: well, it had 8 already
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: home chipset are quite often limited to 8 GB, but if you have 4 slots on mobo then quite likely it should support 16 GB
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: should be 16 now
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: remove old rams and just leave new ones
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Dixon Tech: shows the original 8 gb, instead of 16
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Tech: Dixon smirks at Ayasinda's saying.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Robbo Tech: I wouldn't think there's an 8GB limit unless it's a really ancient machine.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: what cps is it?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: cpu
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: thre are many that dont appreciate running more that 2 slots
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: there shouldn't be a 8gb limitation if it came with 8 and has 2 expansions
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Robbo Tech: And yeah, testing with only the new sticks should be very informative, but a lookup to double-check the system maximum specs is a good idea.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: it is possible you mixed lov voltage rams with standard rams - that won't work
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: although it was a referb... could have just used more ram in the original slots?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: what CPU / chipset or model of motherboard ?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: checking
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Robbo Tech: Honestly, just punch it into Crucial.com's system advisor. It'll tell you all the goods.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: HP8300 Elite is the PC
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Robbo Tech: And assuming it's a model of off the shelf PC, it'll tell you the specs.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: it supports up to 32 GB
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: does mean it does
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: the RAM I got was DDR3 PC3-10600 1333 Mhz
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: example, this machine is a 5775C on Z97, it "supports" 64gb. But it won't respond when all 4 are filled
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: can you give exact model or new RAM and one of old RAM sticks ?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: works fine with any 2. 
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: model number?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: it's a grounding issue, asus boards handle more ddr3 than most, but most 2 is much mroe stable
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: part number, should look similar to that: HMT325R7CFR8A-H
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: on HP sticks there is probably some HP part number
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Robbo Tech: There's a bunch of models of the 8300 elite, so you'll need to ensure the exact speed/specs. Couple I checked show a default of PC3-12800. If you've got mismatched speeds, that'll be trouble.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: JR3UL13331722308-4M*2
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: that's the new ram model number
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: will the old ram have the model number on the actual ram unit?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Dixon Tech: should
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: ok getting that now
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: wouldn't it just throttle the data bus?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: so in general, if it fits the slot, should it work? Or do I need the right mhz or something?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: generally they all need to be the same speed, all the same brand even better
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Exiled To Aphelion Tech: why are you guessing? it's is stamped on the chip
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: try taking out the old memory and putting the new ones in their place, boot and see what happens?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: if you see 8 with the new chips, then maybe there's some incompatibility between the new chips and the old ones.  If not, then it's likely the chips.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: do I need to put the new ones in the old slots, or just remove the old ones
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: but im also telling you ddr3 had issues, and less slots is generally happier. I'd invest in 2x 8gb sticks were it me
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Agent Phillip Tech: put the new ones in the old slots
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: sometimes you need to slot them in order.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: not always, but best to load them there as you know those slots work without issue
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: if it works with new RAMs then use mixed conf - 1 old and 1 new stick 
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: old ram model number is M378B5273CH0-CH9
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: old RAM is PC3-10600, 1.5 Vol
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: says samsung 4gb 2Rx8 PC3 10600U-09-10-80
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: with one of the old ones removed, it said memory size error at boot
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Negader Tech: could try just the new ones, and see if new are compatible with your mobo
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: likely needs memory in pairs
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Sivak Tech: my memory is 32gb 2933mhz
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: so, if they need to be in pairs, I cannot expand memory I can replace with higher memory?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: in the same two slots?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: I cannot find manufacturer of new ones (JR3UL13331722308-4M), do you know who manufactured them?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Yes, THAT Xyzzy Tech: if you have 4 slots, you probably need 2 chips at a time...
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: i suggest you look up the motherboard, most need to be installed in pair in the correct slots. the order matters
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: trachx, LARES DDR3 U DIMM
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: product name LEVEN DDR3 U-DIMM
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: sometimes the motherboard slots will be labeled if you look carefully
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: if you dont check the book and just plug them in, usually, it will still work, what you may not get, is all your memory bandwidth
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: gotta check the motherboard book to see what slots to use, in what order
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: I tried just using the new ones in the new slots, and the computer blinked red and the fan went crazy
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: what is a motherboard book?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: look at the motherboard, find the model, the manufacturer will have the user manual
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Negader Tech: refer to hour mobo docs to see what mem you can use and may explain the beep numbers if you had any just now
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: just guessing that L in JR3UL stands for Low Volt (1.35), 
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: but then similar memory https://www.amazon.com/LEVEN-PC3-10600-Unbuffered-Computer-JR3UL1333172308-8M/dp/B08F7XCQRH , claims to be 1.35/1.5
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: the new ram is 1.35, 1.5
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: you can use 1.35, thats ddr3l
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: cannot
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: you need 1.5v
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: ok the motherboard is PCEBK0ECY4UUHX
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: or is that serial number?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: I see 657094-001
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: that sounds serial, google the first one
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: and 656933-001
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: first says SP# second says AS#
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: 657094-001 is HP part number for MoBo
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: if its an hp, even easier
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: should have a sticker an hp # on it, plug it into their website they will provide all the manuals
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: their mobos are custom, so have to use their guides
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: yeah it's hp
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: but I think it's a moot point now
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: put the original rams back to their original slots, and now when I try and boot it up, it just blinks red
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: did I brick it?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: unlikely
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: no, putting ddr3l in might damage the ram, but not the board
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: so how do I make it start?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: unless you were installing / removing them without disconnecting power
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: pull the battery out to clear the cmos, pull out the ram and reseat it and try again
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: where's the battery?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: or can I find a picture somewhere?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: you ARE doing this with the power disconnect right?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: you should be able to see it, bit flat disc battery
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: and one hand on some grounded surface...
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: removing it will reset the BIOS to default settings
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: in the middle of board, close to CPU and white RAM slot
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: yes, I unplugged it. Although the first ram I plugged in I realized the computer was still plugged in
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: https://www.amazon.com/HP-657094-001-System-motherboard-assembly/dp/B009SOE71M
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: just make sures everything is seated and clean and pray then
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: if it is your board - then you should see battery almost in the middle of mobo 
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: took out the battery, and put it back in, still blinking red when I power up
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: but I see you said take the battery out, then remove the ram and put it back in?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: is that correct?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: removing battery should clear cmos, also it is possible there is "clear cmos" button somewhere on board (if there is - then just install battery and with AC power disconnected press it of 5 seconds)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: reinstalling modules sometimes helps if you have incorrectly installed them
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: if it is old PC - then sometimes dirt gets into slots when you remove and install memory
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: 2560x1440
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: mis
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: yes, pull them out, make sure slots clean, put them back (reseat)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: ok, thank you guys
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: doing it now
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: it actually booted, but said memory size error, but press F1 to continue, is that ok?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: normal
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Tech: that's normal
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Tech: any time you change the amount of RAM in a computer, it wants you to verify that what it's seeing is what you expected
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: however, is it possible that HP requires you to start from scratch?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Tech: no
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Trachx Tech: I mean maybe you need repeat - clear CMOS / remove battery  - then install new modules ?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Tech: never need to clear CMOS unless something's glitching
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: ok, got it working, and all 16gb are working
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: I am embarassed to tell you what the problem was:)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: grats
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: but you all took time to help me, so I owe you a laugh:)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: wait until you hear a happy click?
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: that's it Illi
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: heh
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: I was so overly careful, that I didn't have them far enough in
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: I was afraid I would damage them
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Illivex Tech: better gentle than sorry
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: but when I though the computer was broken I said fuck it, and shoved them in, and you had it, I heard that click
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Agent Phillip Tech: I had that problem with ram before
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: so I booted with the original 8 and it worked, then I tried it with the new ram, making sure they snap, and sure enough, 16gb!
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Tech: great that the RAM is compatible and you're running on all cylinders now :-0
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Tech: err :-)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Tech: Agent Phillip claps at Piffaron's performance.
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Negader Tech: now youre a specialist
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: hehe
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: thank you
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: I actually did it in highschool, graphics card too, but that was a looooooong time ago
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Ayasinda Tech: and you learned something. You'll never ever make that mistake again
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Piffaron Tech: it was a good chuckle too:)
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Sath Tech: if he's writing code to parse rchars, then it makes a difference
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Sath Tech: mis
T3/r7/2021-02-27.txt.gz:{chan ch=tech}Mannec Tech: personally, i prefer parsing uchars.  those pesky 'r' are nothing but trouble.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Giddorah Tech: So, I had a computer crash and had to re-add stuff...
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: bummer
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Giddorah Tech: Now for some reason when I try to re-add a plugin I wrote, I get an error saying "You have not specified a script file name:" and a bunch of functions that are in the file
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Giddorah Tech: Any idea what can do that?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: that error is for when triggers or aliases are set to call a script function that isn't detected after the code in the <script> block is loaded... not sure what is causing that to happen for you
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Perryn Tech: is there a way to set priority to metal weapons with dinv?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: don't believe so
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: Hi all. I made a decision to move from cmud - I lost heart because of window handling issues. The mapper on Cmud IS a fantastic tool to be sure. So my quesion is: IS it possible to see the entire zone? (per zone level/layer/z-coord, of course)
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: Is it possible to see the entire zone in which client
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: MUSHclient. Sorry, like an idiot, I assumed almost everyone was using that
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: the mapper tries to show areas as well as it can, but there's no z-coords or requirement areas make sense on a 2d-grid
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: you can do 'mapper showroom 12345' to have it render from the point of view of a specific room
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: You misunderstand.  I say 'layer/level/z_coord' as in...all rooms on the same plane (no rooms above or below until you get to THAT plane).
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: Let me try this: is there ANY manual manipulation of the map?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: because rooms are all same distance apart and room links are same length
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: no, there's just the image maps people make
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: and there's absolutely no guarantee that room connections are the same length
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: rooms do not have x,y,z coordinates here
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: outside of continent areas, at least
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: Nohh That is EXACTLY my point. IN cmud you could move the elements around to cater for indeterminate link length
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: then your rooms would not overlap
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: I guess I just liked being able to see the area layout more fully
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: that's really not an issue in the vast majority of areas
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Nohh Tech: just use external maps, their layouts aren't restricted like a map display in a mud client would be... no idea how you'd display an area like xylmos otherwise
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: Call it a need for 'spacial awareness'
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: Sorry to be a pain but these are considerations I didn't have to contend with before...exits with locked doors, do I have to trigger for this?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: i don't know if that kind of trigger is allowed
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: I mean "The door/gate/window north is locked/notopen" kind of thing.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Frostpaw Tech: i'd imagine it was allowed if no automated openings, etc
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Frostpaw Tech: like "echo/gt east is locked" is allowed, id imagine
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: It must be allowed. both of zugg's client mappers can have doors specified as part of a room link. Thus, when you move through the map, it quto-opens doors.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Ayasinda Tech: just bomped in. What is the problem with exits with locke doors?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Greybeard Tech: that is just a custom exit
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: but you cannot manually add 'metadata' to the map in anyway...like "exit n, door 'true'" or some such...one just has to use a blanket trigger for "blah n is locked/closed" cmd:open blah n
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: am I to understand that mushclient doesn't auto open doors?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Frostpaw Tech: it does not
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Gilduran Tech: You could setup an alias to open all doors
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Frostpaw Tech: which is what I do
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Ayasinda Tech: or you can teach mush mapper to open doors for you
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Gilduran Tech: You could
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: "teaching" means marking where the doors are? like in z/cmud?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Gilduran Tech: That would mean a lot of cexit's
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: you do not have to 'teach' c/z mapper. It (almost always) works out if a door exists.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Ayasinda Tech: Teaching meaning marking where the doors are and opening them
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: like 'if immediate move <direction> fails, check for door
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: ...furthermore, is there a way to force the map to display an area? Not to make too many comparisons but cmud mapper had a list of areas that one could select and see, even if the character is in a different one
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Ayasinda Tech: not without making your own script I think
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: change is difficult
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: if you find mushclient not to your liking you can always try mudlet, there's an add-on for aardwolf  which does a pretty fine job of mapping
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: try cmud, very powerful scripting
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: (see earlier tech messages)
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: and allows you select an area to view even when you're in another one
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: tintin also has awesome scripting
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: cmud= great map, good scripts...shitty windows management/handling.  I have spent 2 days in the same room (pretty much) as the cmud window system shiut itself and (WOW) the developers took a leave of absence more than 10 years ago yet still charge full price for an undeveloped product.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: lol i'm surprised someone still collects the monie
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: you did something wrong. I've been using cmud for 12 years and never have had that happen to me. Anyway, it's what you like the bottom line.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I went on their forums recently, collecting is all they seem to do these days :)
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: Disappointingly, it had been automated from the zmud days.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Frostpaw Tech: to be fair, zugg has a high paying job atm that requires/d his focus
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Frostpaw Tech: government level job, that is
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: kek
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: you are correct. The entire thing would be dead completely but for one or two folk who gladly support the thing off their own bat. The only time the devs are seen is when there is a licensing (money) issue.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: and that really pisses me off.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: too bad it's not opensource
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Frostpaw Tech: it shouldnt be opensource, but thats a whole another can of worms
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: I think if you haven't put in the time your complaints are based on false expectations. As said, though, the bottom line is what you like. The things I've accomplished with cmud may also be done elsewhere I am sure.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: a promising new client is mudlet
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: pueblo 4 lyfe
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I'm using mudlet and it's a great replacement for zmud (what I used to use)
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: awesome
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: many of the Pueblo features are in cmud. MXP is alive and well.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Can't De Cide Tech: i like mudlet also pretty nifty.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: all my life i haven't used anything but tintin++, a small graphical one called alclient, and mudlet. tintin is my favorite.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: I spent the last 2 years scripting for cmud and aard but the window problems are extremly frustrating. Eg., it is so easy to screw the entire display just by an accidental dragin t he structure. You can 'lock' the layout but that does not prevent all problems. Anyone taking full price for a long-expired product needs to be put against the wall.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: I would have liked to have run into tintin+ before cmud. I am not in the mud to spend the amount of time on cmud on a new client.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: I started mudding way back in 1994 using tintin
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: noice
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: i started mudding in 2017
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Undertaken Anaristos Tech: I do use tintin+ with my phone, just trying to get it to work.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: You cannot substitute for anice map though :P
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Selitos Tech: that does bring back memories, did the same though most of the mid/late 90s
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: EliteMud I did back then
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I started mudding on the original MUD, using a zx spectrum and dial up modem :)
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: I can go back to having a ZX81
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I had one of those as well
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: 69.95 
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: I got mine free. A friend bought one, his power supply failed, they sent a complete replacement. I used a suitable replacement
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: the zx81, my brother and I got it as a kit to solder ourselves
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: Yeah. That was only 59.95. :P For the extra 10quid it was worth it
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: to have the pre-buil
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: to have the pre-built version
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: those wobbly ram packs were a pain
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: Alas, I didn't have one.  I went from ZX81 to C64
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I wanted a C64 but couldn't afford one
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: computers used to beoverpriced
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: i paid about 
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: $150 for my apple iii, apple iie emulator card
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: back then they weren't as mass produced as they are now, plus they used loads of custom chips and stuff
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: 1996...I was in a store in Leamington Spa. I saw an Amiga with 9MB (9*1024, not millenial pussyGB) RAM. I couldn't believe my eyes.  It was computery nirvana when everything else maxed out at 512k or less
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I got myself an Amiga B2000, at the time they had an educational discount, had to pick it from Southampton (or Portsmouth I always get the two mixed up)
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Selitos Tech: yeah crazy to think we all carry 100 times the equivelent of a desktop computer back then in our pockets now
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: they're equivalent to the supercomputers of yesteryear, but what do we do with them? play games?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: it's what i did with the supercomputers of yesteryear too :p
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: most muds were hosted on edu's
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: back in the day 386 did a passable job of voice recognition, but now with immensely more powerful hardware, voice recog is outsourced to the cloud
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: I still have some i386 machines that aren't bad even by today's standards.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: for what definition of "not bad"?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: Comparable to devices still being sold
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Your Intuition Tech: we went to the moon using hardware that had only 256kb of ram or what was it. today we have 16/32 Gb of ram and we can open the browser with 2 tabs, maybe 3.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Selitos Tech: my first family computer had 64kb RAM
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: I regularly use about 16-24 tabs, and my machine only has 8 gigs of RAM
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I have to disagree with that, seriously my firefox has well over 100 (maybe over 200) tabs opened on 3 windows
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: yeah most browsers are pretty good
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: the point there is that, back then, the resources were limited or fixed so the devs had to be far more creative. Eg., paradroid, elite, etc. Now, the thought process runs, "We'll make it and they will just have to buy bigger to work it."
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: you cant compare the two, consumer grade computer hardware would kill every astronaut :p 
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: actually, modern consumer embedded devices are remarkable
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: didn't the shuttle use a hardened version of i386 or something?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: parity was taken out of consumer hardware long ago, intel saw to that
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: the lack of default parity (memory error checking) literally woudlnt fly
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: or you'd die doing it. imagine when your very simple 200 lines of code has a 1-bit error
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: what I don't understand is why aircraft black boxes are still using archaic forms of storage
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: then your rocket doesnt fire
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: maybe there's an unrevised specification airlines have to conform to
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: money and if it works it works
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: why would they pay to upgrade if it works the way it is
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: sd cards are ridiculously cheap
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: proven track record, upgrades very dangerous because pilots dont all get proper training
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: and even a $5 arduino can write to them
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: but see, they have to put ouyt a bid
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: see the issues a few years ago with the pilots fighting the software and dying
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Ocho Ocho Ocho Tech: so that $5 card would be $20k a pop
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: eek
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Selitos Tech: comapnies are hardly ever up to date on software hardware...my company just release a new software thats based on internet explorer, I'm like, why the hell they do that, IE is obsolete in a few months?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Abraxos Tech: off
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Abraxos Tech: sorry, typo
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: flash storage has been around for years, last century's tech
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I though IE was obsoleted ages ago? 
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Selitos Tech: ...heh yeah my point, but not officially yet
T3/r7/2021-02-28.txt.gz:{chan ch=tech}[Outlaw] Mendaloth Tech: was it ever soleted?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: IE11 is better than the older ones, but it still doesn't conform to modern standards
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: Edge is really Microsoft's ongoing flagship browser
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Selitos Tech: was replaced with edge
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: but even that is a rebranded version of Chromium
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: when I set my user-agent on firefox to IE and lot of websites complain
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: they also complain about Edge as well :)
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: that's odd
T3/r7/2021-02-28.txt.gz:{chan ch=tech}[Outlaw] Mendaloth Tech: They don't complain about lynx.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: they only seem to want FF. Chrome, Safari
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: Edge should be based on the most up-to-date version of Chromium, which is based on the most up-to-date version of Chrome
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: I use neither. I will only use MS as a bare minimum. I despise it and the boat it came in on
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: Firefox and Safari aren't bloated
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: I have firewalled almost all MS functions outside of update
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: yeah ms is a big fan of telemetry
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: they do big caches which kill your ssd and do nothing other than give them information and usage records
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I have a laptop that I use only for games, it came with Win10 and I have never even configured a network connection for it :)
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: noice
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: i'd update it every now and then, though, as you may be missing out on updated drivers
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I don'
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: google are no better really. I had cyanogemod installed on a galexy s2. You could monitor calls to services/functions. They were after location info every 12 seconds.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Kagaku Tech: I don't really care, as long as the games run
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: gosh that often
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: I'd do everything on linux if I could.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: same
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: most software companies, aside from ones that use electron, don't usually support linux
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: i love the fact that spotify and discord support linux tho
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: actually, ms isnt nearly as evil as they used to be, win10 does a lot of diagnostic crap in the background, but it doesnt collect personalized info pretty much at all
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: a pity....everything would be sweeter on linux
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: but whenever i do that, i hook the env variables so that they write their heavy caches to /dev/null lmao
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Illivex Tech: ios and android on the other hand....
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: android can be fixed
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: get a root shell and hook every function you don't like
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: move the rest of their daemons into userspace, and apply chroot + restrictions
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: and impose iptables
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: you notice that (pretty much) for android, you can move apps to SD storage...but not google apps....and you can use power saving for apps except google.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: and the only good google thing is maps
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Chevy Tech: you can cap google apps manually
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Dhalsim Tech: in a stack..then you can pop a cap
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Perryn Tech: I'm looking for the readme for pwar's inviter... I can't figure out how to list the commands and my google-fu is failing me
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Tech: commands are ikey and ilist (with or without argument)
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Tech: ikey will tell current settings
T3/r7/2021-02-28.txt.gz:{chan ch=tech}[Battle] Scars Tech: could use hadar's inviter instead
T3/r7/2021-02-28.txt.gz:{chan ch=tech}[Battle] Scars Tech: more robust helpfiles and features
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Perryn Tech: thank you magna for the commands. Thanks scars, I will look at that one because I think I'd like more functionality
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Perryn Tech: is that the group manager?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}[Battle] Scars Tech: it is
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Perryn Tech: thanks again!
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Tech: [Battle] Scars gallantly tips his hat.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Sath Tech: is there a way to make dinv weight mastery-type weapons higher?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Areia Tech: Not directly but see dinv help weapon.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Sath Tech: yeah, that's gonna be pretty manual
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Areia Tech: Oh nos, not manual...
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Sath Tech: imagine getting ridiculed for wanting to automate menial tasks on tech :P
T3/r7/2021-02-28.txt.gz:{chan ch=tech}High Risk Losteix Tech: pretty sure nobody actually installs dinv to make their lives easier.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Areia Tech: I have the command aliased to two letters. It's not hard to type in when you need or even make a trigger to do it for you.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Sath Tech: does it automatically weigh it against other weapons?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Areia Tech: Yes.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Sath Tech: by re-weighting weapons with mastery types?
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Areia Tech: You tell it what damtype to wear. It wears the best weapon with that damtype and whatever eq goes best with it.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Sath Tech: I want to automatically wear the best weapon, regardless of damtype, taking into account mastery
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Sath Tech: if I need to write my own code so be it, was just asking if dinv has any form of that capability
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Areia Tech: Nah.
T3/r7/2021-02-28.txt.gz:{chan ch=tech}Sath Tech: ok, thanks